Network settings

Fix the IP address

To eliminate incautious mistakes during installation, Network Camera will stay in installation mode whenever it starts unless "Reset network at next boot" is disabled. This option can also be disabled using the Installer program. Once the option is disabled, Network Camera will skip installation at the next boot and the Installer program will not find the installed units. That implies that Network Camera cannot be accessed if no one remembers the IP address, except for restoring factory default settings. However, with this option disabled Network Camera can automatically operate normally after restarting in case of losing power.

Basic network settings

Administrators may need to modify the network settings to fit into existing networks. The subnet mask in some broadband service may differ from the default value 255.255.255.0 and service providers may assign more specific network settings. Administrators should change the configuration to what given by the service provider. The configuration may include "IP address", "Subnet mask", "Default router", "Primary DNS server" and "Secondary DNS server". After changing network settings, be sure to leave "Reset network at next boot" blank to skip next installation when the system restarts. Otherwise those network settings will be erased at the next start.

Bandwidth utilization limit

Each Network Camera can be limited in bandwidth utilization by administrators according to its priority and importance of location. "Bandwidth limit" is most useful to balance network utilization when multiple Network Camera’s are installed in the same network. It is more effective than changing image quality only and achieves better performance with adequate image size and quality.

Changing port number of servers

For security or network integration, administrators also can hide the server from the general HTTP port by changing "HTTP port" to other than default 80. “Local FTP server port” can also be changed to other than default 21. Administrators should have enough network knowledge to change the default port.

E-mail settings

Network Camera not only plays the role of server, it will also actively connect to servers outside to send out messages or snapshots. When Network Camera starts, it will send out a system log via e-mail as long as the settings are correct rather than upload it via

25

Page 25 Page 27
Page 26
Image 26
Vivotek IP2112, IP2122 manual Network settings
Page 25 Page 27

IP2112, IP2122 specifications

Vivotek has established itself as a notable player in the realm of IP surveillance cameras, and the IP2122 and IP2112 models are prime examples of their dedication to quality and performance. Both models are designed to meet the rising demands for security in various environments, from retail establishments to transportation hubs.

The Vivotek IP2122 boasts a range of advanced features tailored for high-performance video surveillance. With a 1.3-megapixel resolution, this camera captures detailed images with clarity, making it suitable for identifying faces and license plates. The camera utilizes a progressive scan CMOS sensor that excels in varying light conditions, providing better images in both bright and low-light environments. It supports H.264 video compression, which offers efficient storage and bandwidth savings without compromising on quality.

On the other hand, the Vivotek IP2112, while similar in many respects, presents slightly varied features. This model also utilizes a 1.3-megapixel sensor and is designed for cost-effective deployment, ideal for users seeking reliable surveillance without excessive complexity. Like the IP2122, it supports H.264 compression, ensuring efficient video quality even in high-motion scenarios.

Both models are equipped with Vivotek's Smart Stream technology, which intelligently adjusts the video quality based on the activity in the scene. This dynamic feature assists in optimizing bandwidth usage and storage requirements, making it a sustainable option for long-term surveillance needs. Furthermore, these cameras utilize a built-in SD/SDHC card slot for local storage, a feature that enhances flexibility for users who prefer recording without depending solely on external servers.

An essential aspect of the Vivotek IP2122 and IP2112 is their ability to work seamlessly with Vivotek's own network video recorders and third-party solutions. Both models are compliant with the ONVIF standard, ensuring interoperability with various security systems and additional video management software.

In terms of physical design, these cameras are compact and feature a weatherproof enclosure, making them suitable for both indoor and outdoor installations. The vandal-resistant features also ensure durability in high-risk environments.

In summary, the Vivotek IP2122 and IP2112 are powerful tools designed for effective surveillance, featuring high-resolution imaging, Smart Stream technology, and easy integration into a broader security system. These characteristics make them excellent choices for anyone looking to enhance their security infrastructure.
Top Page Image Contents