2-4 Other Settings Using the "VN-C625U Setup Tool" (6. Motor Limit Setting)

When areas that are not required are included during shooting due to the installation position of the camera, make use of the Motor Limit function to set the shooting range.

1.Start up the "VN-C625U Setup Tool" and select [Motor Limit].

When [Mode] is set to "Available", the Pan Limit function will be enabled and panning (horizontal) actions can be controlled.

Controller

Left Side / Right Side

Use the controller to set positions for the left and right limits, followed by clicking the respective buttons.

Clicking moves the positions to the currently set limit positions.

For controlling the tilting (vertical) actions. When this is set to 10˚, the vertical operating range of the camera will be between 10˚ to 90˚. Set values: Off, 1˚ to 10˚

2.When setting is complete, click .

45

Page 45
Image 45
JVC VN-C625 manual When setting is complete, click