3-2 Features that Allow Setting Using the V.Networks Controller
The V.Networks Controller can be used to perform settings for image size and alarm.
1 2 3
1File |
|
New | : Creates a new file if the camera |
Delete | is connected for the first time. |
: Deletes a file. |
Motion Detection Standby
| : Select the camera for which |
| the Motion Detection Standby |
| function is to be enabled. |
Exit | : Exits the controller. |
2View
Image Size : Sets the image display size. JPEG : 640 x 480
320 x 240
Upside Down: Displays the image inversely.
: Select this item and click to start the Auto Pan operation.
Auto Patrol (Mode1 to Mode 3)
:Select a mode for this item and click to start the Auto Patrol operation for the selected
mode.
Auto Trace : Select this item and click to start the Auto Trace operation.
Auto Pan Stop
:Stops the Auto Pan operation.
Auto Patrol Stop
:Stops the Auto Patrol operation.
Auto Trace Stop
:Stops the Auto Trace operation.
Notes
●The following setting are disabled during Auto Pan:
•Auto Pan Setting
•Auto Patrol Setting
•Auto Trace Setting
•Preset Position Setting
•Pan Control
●The following setting are disabled during Auto Patrol:
•Auto Pan Setting
•Auto Patrol Setting
•Auto Trace Setting
•Preset Position Setting
•Pan/Tilt Control
•Zoom Control
●The following setting are disabled during Auto Trace:
•Auto Pan Setting
•Auto Patrol Setting
•Auto Trace Setting
•Preset Position Setting
•Pan/Tilt Control
•Zoom Control
•Focus Control
59
