
1Focus
For selecting the mode of focus.
Easy Auto Focus : Focus will be adjusted automatically
upon performing Pan/Tilt or Zoom operations on the camera.
Manual : Adjust focus manually.
2Color Level
Adjusts the color level of video signals. (Set value:
3Enhance Level
Sets the contour enhancement which controls the sharpness on the monitor screen. (Set value:
4Pedestal Level
Sets the pedestal level (black level) of video signals.
(Set value:
5AGC:
Sets the maximum gain of the AGC (Auto Gain Control), which electronically increases the gain when the object is under low light conditions.
(Set value: OFF, 10 dB, 20 dB)
6Shutter
Sets the speed of the shutter.
(Set value : 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000)
7Manual Focus Level
For adjusting focus when [Focus] in 1is set to "Manual". Focus will be set on a nearer object when the value decreases, and on a distant object when the value increases.
(Set Value: 0 to 100)
Click the
8Iris Mode
For performing setting related to lens iris adjustment.
Auto : Adjusts iris automatically to the default state.
Manual : Adjust iris manually.
Auto+ : Adjusts iris automatically to a level brighter than the default state.
9White Balance
For setting the white balance, which provides a color standard.
ATW : Adjusts the white balance automatically according to the color temperature of the lighting.
AWC : Adjusts the white balance automatically. R Gain: Adjusts the hue of R (red) when in the AWC mode. (Set value: 0 to 100)
B Gain: Adjusts the hue of B (blue) when in the AWC mode. (Set value: 0 to 100)
0Average:Peak
Sets the method of exposure detection according to ratio between the average and peak values.
(Set value: 10:0, 9:1, 8:2, 7:3, 6:4, 5:5)
!BLC
Sets the backlight compensation function. Use this setting when an object appears dark using the Auto Iris function due to the presence of a bright light source behind the object.This function makes it possible to place an unnecessary light source outside the photometry area.
(Set value: OFF, Area 1 to Area 4)
Note
For details on settings and set values, refer to "Image Quality Setting" (☞ Page 64, 65).
97