JVC LPT0320-001B, HR-S9700EK setup guide Stop Playback, Engage RECORD-PAUSE Mode, Resume Recording

Models: HR-S9700EK LPT0320-001B

1 84
Download 84 pages 26.14 Kb
Page 62
Image 62

62

ADVANCEDOPERATIONS(cont.)

8

13

2

Repeat Playback

Your video recorder can automatically play back the whole tape 100 times repeatedly.

7 8 9

0

1

2

REW

STOP

JOG

4

4

3

FF

PAUSE

1

 

START PLAYBACK

 

Press PLAY.

2

 

ACTIVATE REPEAT PLAYBACK

 

Press PLAY and hold for over 5 seconds, then release.

 

 

 

The Play indicator ( ) on the display panel blinks

 

slowly.

 

 

The tape plays 100 times automatically, and then

 

 

stops.

 

 

 

3

 

STOP PLAYBACK

 

Press STOP at any time to stop playback.

 

 

 

NOTES:

Retake

You can cut out unnecessary parts of a TV programme while you're recording it.

End of programme

Beginning of programme

 

 

 

 

 

 

 

 

Programme

Unnecessary

Unnecessary

Programme

 

part

part

 

 

 

 

 

Recorded part

Go back to end of programme to cut out unnecessary part

ENGAGE RECORD-PAUSE MODE

1 Press PAUSE during recording.

LOCATE START POINT

2 Turn the JOG dial to the left or right (or hold down REW or FF) and release it when you reach the point where you want to resume recording.

* Your recorder returns to the Record-Pause mode.

RESUME RECORDING

3 Press PLAY when you wish to resume recording.

Pressing PLAY, REW, FF or PAUSE also stops Repeat playback.

Repeat playback is not possible with a cassette recorded in EP mode.

NTSC Playback

Your video recorder is equipped with NTSC circuitry that can play back NTSC tapes.

LOAD A CASSETTE

1 Insert a cassette recorded in NTSC.

START PLAYBACK

2 Press PLAY.

"NTSCPAL" appears on the screen for about 5 seconds.

Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV.

The picture may roll up and down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

The counter and tape remaining time readings will be incorrect.

During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.

NOTES:

Retake function does not work during Direct Rec (pg. 11).

Noise may appear when Retake function is used at the part that is recorded in EP mode.

Page 62
Image 62
JVC LPT0320-001B, HR-S9700EK setup guide Stop Playback, Engage RECORD-PAUSE Mode, Resume Recording