JVC LPT0320-001B, HR-S9700EK Express Timer Programming, Start Time, Enter Programme Date

20BASICOPERATIONS(cont.)

Express Timer Programming

Before performing Express Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

If you don’t know the PlusCode number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

	ACCESS VIDEO PLUS+
	SCREEN
1 Press PROG.
	ACCESS PROGRAMME
	SCREEN
	Press START +/–. (If you’re			– P1 –
	just starting out, “P1”		START			STOP
2 appears.)
			– –:– –	=		– –:– –
			SP		VPS/PDC OFF
			DATE			TV PROG
			– –.– –				– –
		[+/–] =			[0]:SAT
		[PROG] : EXIT
	The front display panel looks like this:
		SP

8

DC

1,9

PROG

START+/–

1

2

1

2

1

4

7

DAILY2

5

8

0

–WEEKLY–:– – 3

6

9

10

3

4

4

SP/LP/EP 7

3 OK 9

PR+/– 6

	ENTER PROGRAMME
	START TIME
	Press START +/– to enter			– P1 –
	the time you want		START			STOP
3 recording to start.
			21:00	=		– –:– –
	● Press and hold START		SP		VPS/PDC OFF
	+/– to move in 30-		DATE			TV PROG
	minute increments, or		– –.– –				– –
	press and release	[+/–] =			[0]:SAT
	repeatedly to move 1
		[PROG] : EXIT

2,3		–
	4	STOP+/

DATE+/– 5

minute at a time.

The front display panel looks like this:

SP

	ENTER PROGRAMME STOP
4	TIME
	Press STOP +/– to enter the time you want recording to
	stop.
	● Press and hold STOP +/– to move in 30-minute
	increments, or press and release repeatedly to move 1
	minute at a time.

ENTER PROGRAMME DATE

5 Press DATE +/– to enter the date on which you wish to record. (The current date first appears on screen. The date you enter will appear in its place.)