48ADVANCEDOPERATIONS(cont.)
Edit From
A Camcorder
You can use a camcorder as the source player and your video recorder as the recorder.
1 | MAKE CONNECTIONS |
A If the camcorder has no | |
... connect the camcorder’s AUDIO/VIDEO OUT | |
connectors to the recorder’s front panel AUDIO/ | |
VIDEO input connectors. | |
| B If the camcorder has an |
| ... connect the camcorder’s |
| AUDIO OUT connectors to the recorder’s front |
| panel |
1
2
AUX
1
2
–
1 2 3
4 | 5 | 6 |
7 8 9
0
3
4
4
3
PR
● When using a monaural camcorder, connect its |
AUDIO OUT connector to the AUDIO L input |
connector on your recorder. |
● When a Master Edit |
is used, the camcorder is capable of controlling the |
recorder. Refer to the camcorder’s instruction manual |
for operating procedure. |
SET RECORDER’S INPUT MODE |
Press AUX and/or PR to select |
VIDEO input connectors, or |
2 tors being used. |
SET EDIT MODE |
3 See "Picture Control" on page 47. |
NOTES:
●All necessary cables can be obtained from your dealer.
●You can also use another video recorder as the player instead of a camcorder.
●When you select "EDIT" to dub tapes in step 3, be sure to select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF") after you finish dubbing the tapes.
AIf the camcorder has no S-VIDEO output connector...
Recorder
AUDIO | VIDEO | To rear panel PAUSE/ |
input | R.A.EDIT connector | |
input |
|
|
| Video Cable |
|
| (not provided) | |
Audio Cable (not provided) | ||
|
| |
| AUDIO OUT | (not provided) |
| (JVC camcorder | |
|
| |
|
| only) |
Camcorder
VIDEO OUT
EDIT
Player
4 | START CAMCORDER |
Engage its Play mode. | |
5 | START RECORDER |
Engage its Record mode. |
BIf the camcorder has an S-VIDEO output connector...
Recorder
AUDIO input | To rear panel PAUSE/ | |
R.A.EDIT connector | ||
input |
|
|
| Audio Cable (not provided) | |
|
| Cable |
(not provided) | ||
(JVC camcorder | ||
| ||
| only) |
Camcorder
AUDIO OUT
EDIT
Player