36
ADVAN
CED
OPERATIONS
(cont.)
Looking For
The Scene
You Want
Index Search
Your recorder automatically marks
index codes at the beginning of£ 2 each recording. Additional index
codes can be added manually during playback. (See Below.) This function gives you quick access to any one of 9 index codes in either direction.
NOTE:
Before starting, make sure the recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1 Press @ or # (ª or £). “ª 1” or “£ 1” is displayed on screen and search begins in the corre- sponding direction.
1
2
1
2
–
1 2 3
4 | 5 | 6 |
7 8 9
0
30 SEC
3
4
4
MENU
3OK
●To access index codes 2 through 9, press @ or # repeatedly until the correct index number is dis- played.
Ex.: To locate the beginning of B from the current position, press @ twice.
To locate the beginning of D from the current position, press # once.
Current position
A | B C | D | E | F | |||
| 1 |
| 2 | 3 |
| ||
|
|
| |||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Index number
●When the specified index code is located, playback begins automatically.
PLAY
RECORD
Manual Index Mark/Erase
To mark an index code...
...during playback press INDEX MARK on the recorder.
●The recorder will mark an index code at that location.
●If "O.S.D." is set to "ON" (☞ pg. 59), "MARK" blinks on the screen while an index code is being marked.
To erase an index code...
...during playback or still press INDEX ERASE on the recorder.
●The recorder will
●If "O.S.D." is set to "ON" (☞ pg. 59), "ERASE" blinks on the screen while an index code is being erased.
Skip Search
|
| SKIP OVER UNWANTED |
1 |
| SECTIONS |
| Press 30 SEC 1 to 4 times during playback. Each press | |
| initiates a | |
| Normal playback resumes automatically. | |
|
|
|
NOTE:
NOTES:
●Video Navigation (☞ pg. 24) may not work properly when an index code (VISS signal) is marked or erased manually near a start point of recorded programme.
●During timer recording, you cannot mark an index code manually.
To return to normal playback during a Skip Search, press PLAY.
