JVC VN-C625 manual Image Quality Setting  Image Quality Setting

Operations (Step 3 Setting Using the V.Networks Controller)

3-5 Image Quality Setting (Continued)

Image Quality Setting

	Item	Function/Set Value		Initial Value
Distribution Control		Set the maximum transmission control.		OFF
	OFF	Setting of compression level is possible when this is set to "OFF",		2
		and images will be sent out at the specified compression level.
		The smaller the value, the lower the compression level and hence
		a higher image quality. However, data volume will also increase.
		Set Value: 1 to 7
	ON	Setting of bit rate is possible when this is set to "ON", and the		—
		compression level of images will be automatically adjusted ac-
		cording to the specified bit rate before they are sent out.
		Set value: 32 kbps to 8 Mbps
		Note
		• It will be necessary to establish connection again upon
		setting to enable display at the correct frame rate.
White Balance		Determines the setting of the white balance adjustment		ATW
		feature.White balance can be adjusted for lighting conditions
		within a color temperature range of 2,300 K to 10,000 K.
		ATW : Auto-Tracking White Balance mode. Adjusts the white
		balance automatically according to the color tempera-
		ture of the lighting.
		During ATW setting, hue adjustment for the R-gain and
		B-gain items will be disabled.
		AWC : If AWC is selected from the pull-down menu, the Auto
		White Control mode will be activated for white balance
		adjustment. Switching from the ATW to AWC mode will
		take at least 15 seconds.
R Gain		Adjusts the hue of R (Red) when in the AWC mode.		22
		To enhance red † Increase the value
		Set Value: 0 to 100
B Gain		Adjusts the hue of B (Blue) when in the AWC mode.		31
		To enhance blue † Increase the value
		Set Value: 0 to 100
Color Level		Adjusts the color level of video signals.		0
		To lighten the color † Decrease the value
		To darken the color † Increase the value
		Set value: -5 to 5
Enhance Level		Sets the contour enhancement which controls the sharpness		0
		of video signals.
		To soften the picture	† Decrease the value
		To sharpen the picture	† Increase the value
		Set value: -5 to 5
Pedestal Level		Sets the pedestal level (black level) of video signals.		0
		To darken the picture	† Decrease the value
		To brighten the picture	† Increase the value
		Set value: -5 to 5

64