Settings (Step 3 Setting Using the V.Networks Controller)
3-1 Starting Up V.Networks Controller
The installed "V.Networks Controller" can be used to monitor camera images.
In addition, recording/playback operations and setting of frame rate for camera images are also possible.
1.Select [Start] † [Programs] † [V. NETWORKS] † 
[V.Networks Controller] to start up the "V.Networks Controller".
1 Select the camera to connect to from the
2 Live images from the camera wil be displayed.
Notes
●Enter the correct password if a password has been set.
●This controller can be connected to
58
