JVC VN-C625 manual Alarm Input, Operation when an alarm input is activated

Settings (Step 2 Network Settings)

2-4 Other Settings Using the "VN-C625U Setup Tool" (3. Alarm Setting)

This section describes procedures for alarm setting.

Alarm Input

•When there is an input of signals to the alarm input terminal on the ceiling mount. (☞ Page 16 "Alarm Input Terminal")

•When motion is detected. (☞ Page 46 "Motion Detection Setting")

•Upon movement to a new position.

•When there is a change in the Black & White mode.

Operation when an alarm input is activated

•Output signals are sent from the alarm output terminal on the ceiling mount. (☞ Page 17 "Alarm Output Terminal")

•Alarm packets are sent to the PC. (☞ Page 39 "Message Packet")

•The camera shifts in position.

•Black & White mode changes.

•Images are uploaded to the FTP server. (☞ Page 50 "FTP Client Setting").

•Quits all operations. (☞ Page 39 "Shutdown")

1.Start up the "VN-C625U Setup Tool" and select [Alarm].

1

2

3

4

36