Manuals / Cornelius / Kitchen Appliance / Juicer

Cornelius 3 service manual Step, Action, Procedure, Button, Description

Models: 3

1 74

Download 74 pages 15.36 Kb

Page 27

Step

			Viper Service Manual

			Table 11

	Step	Action	Procedure


	3	Set correct hour	Use the + or - buttons at the bottom of the display to
			set the proper hour.
	4	Select minute field	Use the left and right arrows to select minute field.
	5	Set correct minute	Use the + or - buttons at the bottom of the display to
			set the proper minute.
	6	Select AM/PM field	If the 12 hour clock option is selected, use the left and
			right arrows to select the AM/PM field.
	7	Set AM/PM	Use the + button at the bottom of the display to set the
			AM/PM setting.

To set the date, perform the procedure in Table 12 and refer to Figure 14.

		Table 12

Step	Action	Procedure


1	Set date	Use up and down arrows on the right side of the con-
		trol panel to highlight DATE display on screen.
2	Select month field	Use the left and right arrows to select month field

3	Set correct month	Use the + or - buttons at the bottom of the display to
		set the correct month.
4	Select day field	Use the left and right arrows to select day field.
5	Set correct day	Use the + or - buttons at the bottom of the display to
		set the correct day.
6	Select year field	Use the left and right arrows to select year field.
7	Set correct year	Use the + or - buttons at the bottom of the display to
		set the correct year.

Setting Daylight Sav- ings Time

Once the date and time are set properly, daylight savings time settings can be done. The Daylight Savings Time menu is shown in Figure 15. If daylight savings time is off, press the + button to activate it. The button functions are described in Table 13. To set daylight savings time, perform the procedure in Table 14.

NOTE: Default daylight savings settings are for the U.S.

	CLOCK	DST:				ON
	SETUP	SPRING MONTH:				MAR
		SPRING WEEK:				1
	12:51P	FALL MONTH:				OCT
	12:51P	FALL WEEK:				L
	MAR 04	FALL WEEK:				L
	MAR 04

	BACK CLOCK		DST		-	+

Figure 15. Daylight Savings Setup Screen

			Table 13

	Button		Description


	BACK	Returns the display to the Select menu
© 2010, IMI Cornelius Inc.		- 21 -	Publication Number: 621360041TBSER

Image 27

Cornelius 3 service manual Step, Action, Procedure, Button, Description

Contents

Revision Date N/A Revision A FRUITISTA VIPER 3 FLAVORRelease Date September Publication Number 621360041TBSERTrademarks and Copyrights Contact InformationIntroduction Page Preventative Maintenance Page MANUAL OVERVIEW INTRODUCTIONDifferent Types of Alerts SAFETY INSTRUCTIONSREAD AND FOLLOW ALL SAFETY INSTRUCTIONS SAFETY TIPSCO2 CARBON DIOXIDE WARNING QUALIFIED SERVICE PERSONNELSAFETY PRECAUTIONS SHIPPING AND STORAGEDANGER Overrun, as Applied to Carbonated BeveragesMOUNTING IN OR ON A COUNTER DISPENSED PRODUCT CONDITIONSLow Dispensing Volume Affects Overrun BRIX Affects OverrunFreezing Affects Overrun INTRODUCTION SYSTEM OVERVIEWTHEORY OF OPERATION Figure 2. Fruitista Viper 3-BarrelWiring Diagram Publication Number 621360041TBSER2010, IMI Cornelius Inc CO2 System Viscosity SettingsCO2 Setting SyrupFigure 5. 3-BarrelSystem Schematic 2010, IMI Cornelius IncPublication Number 621360041TBSER CONTROL PANEL Water SystemSyrup System IntroductionControl Panel Buttons Control Panel DisplayClock Setup Event Setup Option Setup Setup Sub-MenusMaintenance Sub-Menus Error StatusButton System MenusMain Menu CONTROL PANEL MENU DESCRIPTIONSDescription ButtonDescription ButtonDescription Error TypeButton DescriptionDescription DisplayedAction TypeDescription Setup MenuError Log Menu ButtonButton ProcedureButton DescriptionAction ProcedureProcedure StepStep ProcedureButton DescriptionStep ProcedureButton DescriptionStep ProcedureProcedure ActionAction CO2 Setup MenuProcedure StepProcedure StepAction Setting the Time Format Maintenance MenuSetting the Temperature Format Setting the Date FormatBarrel Maintenance Menu Purging a Barrel ProcedureAction Step ProcedureProcedure ProcedureDisplay ProcedureAction the systemValue DisplayDescription DisplayDescription ProcedureDisplay ValueAction ProcedureFigure 24. BRIX Setup Screen StepMotor Setup Menu EEPROM is not installed or is faultyMotor Type Description ProcedureProcedure ButtonDisplay ProcedureStep ActionPressure Sensors SecurityBACK BRL UNIT VER Figure 31. Unit Data ScreenViper OPERATIONDispensed Product Throughput MAINTAINING PRODUCT QUALITYSleep Mode Recom- mendations Viscosity SettingCO2 Setting Programmed Defrost SchedulingAction STARTING THE UNITProcedure StepMaintenance Procedure PREVENTATIVE MAINTENANCESUMMARY Table Preventative Maintenance SummaryAction Cleaning Air FilterMONTHLY MAINTENANCE StepStep Cleaning the Syrup ConnectionsSEMI-ANNUAL MAINTENANCE Inspecting and Replacing Scraper BladesAction Servicing Motorman Dispensing ValvesStep ActionStep Sanitizing the SystemStep ActionAction StepAction StepAction StepAction StepAction Cleaning the Water FilterProcedure StepStep COMPONENT REPLACEMENTBARREL MOTOR SEAL REPLACEMENT Removing the Existing SealSpacer Note Orientation Motor Shaft Installing a New SealStep ActionAction BARREL MOTOR REPLACEMENTMotor Seal Leak Test StepStep MOTOR RUN CAPACITOR REPLACEMENTAction ActionStep WATER PUMP REPLACEMENTStep ActionAction CO2 PULSE VALVE REPLACEMENTAction SYRUP AND WATER SHUTOFF SOLENOID REPLACEMENTProcedure StepStep CONDENSER FAN MOTOR REPLACEMENTCOMPRESSOR REPLACEMENT ProcedureStep HOT GAS SOLENOID REPLACEMENTStep ActionAction LIQUID LINE SOLENOID REPLACEMENTSYRUP PRESSURE SWITCH REPLACEMENT StepWATER PRESSURE SWITCH REPLACEMENT StepAction Action DISPLAY BOARD REPLACEMENTStep ActionAction CONTROL BOARD REPLACEMENTSoftware Compatibility StepAction MOTOR BOARD REPLACEMENTProbable Cause TROUBLESHOOTINGTROUBLESHOOTING THE SYSTEM ProblemRemedy Troubleshooting Product Not ColdProblem Probable Cause2010, IMI Cornelius Inc Publication Number 621360041TBSER