Cornelius 3 service manual Step, Action, Procedure

Viper Service Manual

		Table 19
Step	Action	Procedure
1	Set CO2 Pulse valve dura-	From the Setup screen (Figure 13), select the CO2
	tion	Setup screen, shown in Figure 18.
2	Select barrel	Use the Up and Down arrows to highlight the desired
		barrel.
3	Select duration field	Use Left and Right arrows to select duration field
4	Set duration	Use the + or - buttons at the bottom of the display to
		set the desired duration.
5	Select barrel	Repeat Steps 2 through 4 for all barrels.

To set all barrels in the system to the same duration setting, perform Steps 1 through 4 in Table 19 and then press the ALL button at the bottom of the display while highlighting the duration setting you desire for all the barrels. When the duration settings are complete, press the BACK button to save the settings and return to the Select menu, shown in Figure 13.

Option Setup Menu

The Option Setup menu allows the user to set the various options available in the system. These options are listed in Table 20. The Option Setup menu is shown in Figure 19.

The functions of the display buttons change, depending on the highlighted selection on the Option Setup screen. Refer to Table 20 for a listing of the button functions for the various field selections.

OPTION	TEMP FORMAT	oF
SETUP	DATE FORMAT	USA
	TIME FORMAT	12 HR
	POS LIGHTING ALWAYS
12:51P	#1 SYRUP TYPE:	FCB
MAR 04	#2 SYRUP TYPE:	FCB
BACK	oF	oC

Figure 19. Option Setup Screen

Table 20

Option	Button 2	Button 3	Button 4	Button 5
Temp Format			°F	°C
Date Format			USA	EURO
Time Format			12 HR	24 HR
POS Lighting		OFF	ALWAYS	SLEEP
#1 SYRUP TYPE	FCB	FCB-L	FUB	FUB-L
#X SYRUP TYPE	FCB	FCB-L	FUB	FUB-L

When all the options are set to the desired settings for the unit, press the BACK button to store these settings and return to the Select menu, shown in Figure 13.

Publication Number: 621360041TBSER - 26 - © 2010, IMI Cornelius Inc.