Vivotek IP7131 manual Weekly schedule, Snapshot file name prefix, Digital input

Snapshot

“Enable snapshot” Enable/Disable snapshot application.

Weekly schedule

“Sun” ~ “Sat” Select the days of the week to perform the application. Select “Always” or input the time interval.

Snapshot file name prefix

The prefix name will be added on the file name of the snapshot images.

Digital input

Network Camera will send snapshots when the digital input is triggered.

Send out the snapshot while motion detection

There are three windows for motion detection each can be assigned a name. Select the windows which need to be monitored. If motion detection has not been set up, “undefined” will be shown instead of the window title. If this happens, clicking on “Motion detection” and a note will show to direct the User to the configuration page for motion detection.

“Send pre-event image(s)” The number of pre-snapshots will be captured and send when a condition is triggered.

“Send post-event image(s)” The number of post-snapshots will be captured and send when a condition is triggered.

“Delay second(s) before detecting next motion” Set the time delay before restarting to check on the triggering condition when the current condition is triggered.

- 39 -

www.vivotek.com