Vivotek IP7160 manual Get SDP of Streams, Open the Network Stream

		VIVOTEK
	deleteallow	Remove allowed IP address range from server. If start and end
		parameters are specified, it will try to remove the matched IP
		address. If index is specified, it will try to remove the address
		from given index position. [start, end] parameters have higher
		priority then the [index] parameter.
	deletedeny	Remove denied IP address range from server. If start and end
		parameters are specified, it will try to remove the matched IP
		address. If index is specified, it will try to remove the address
		from given index position. [start, end] parameters have higher
		priority then the [index] parameter.
start	<ip address>	The starting IP address to add or to delete.
end	<ip address>	The ending IP address to add or to delete.
index	<value>	The start position to add or to delete.
return	<return page>	Redirect to the page <return page> after the parameter is
		assigned. The <return page> can be a full URL path or relative
		path according to the current path. If you omit this parameter, it
		will redirect to an empty page.

Get SDP of Streams

Note: This request requires Viewer access privileges.

Method: GET/POST

Syntax:

http://<servername>/<network_rtsp_s<0~m-1>_accessname>

“m” is the stream number.

“network_accessname_<0~(m-1)>” is the accessname for stream “1” to stream “m”. Please refer to the “subgroup of network: rtsp” for setting the accessname of SDP.

You can get the SDP by HTTP GET.

Open the Network Stream

Note: This request requires Viewer access privileges.

Syntax:

For HTTP push server (MJPEG):

User's Manual - 143