VIVOTEK - A Leading Provider of Multimedia Communication Solutions
14 - User's Manual
Using 3GPP-compatible mobile devices
To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed from the Internet� For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 7�
To utilize this feature, please check the following settings on your Network Camera:
1� Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable�
For more information, please refer to RTSP Streaming on page 30�
2. As the 3G network bandwidth is limited, you can’t use large video size. Please set the video
and audio streaming parameters as listed below�
For more information, please refer to Audio and video on page 35�
Video Mode MPEG-4
Frame size 176 x 144
Maximum frame rate 5 fps
Intra frame period 1S
Video quality (Constant bit rate) 40kbps
Audio type (GSM-AMR) 12.2kbps
3� As most ISP and players only support port number 554 to allow RTSP streaming to go
through, please set the RTSP port to 554�For more information, please refer to RTSP
Streaming on page 30�
4. Launch the players on 3GPP-compatible mobile devices, (ex. Real Player).
Type the URL commands in the player�
The format is rtsp://<public ip address of your camera>:<rtsp port>/<access name for stream1
or stream2>.
For example:
rtsp://192.168.5.117:554/live.sdp