Hardware Reset | Vivotek IP8152 manual

VIVOTEK

Hardware Reset

Reset Button

The reset button is used to reset the system or restore the factory default settings. Sometimes resetting the system can return the camera to normal operation. If the system problems remain after reset, restore the factory settings and install again.

Reset: Press and release the reset button. Wait for the Network Camera to reboot.

Restore: Press and hold the recessed reset button until the status LED rapidly blinks. Note that all settings will be restored to factory default. Upon successful restore, the status LED will blink green and red during normal operation.

Micro SD/SDHC/SDXC Card Capacity

This network camera is compliant with Micro SD/SDHC/SDXC of 8, 16, 32GB, or 64GB capacity SD cards.

10 - User's Manual

Image 10

Vivotek IP8152 user manual Hardware Reset

Contents

Rev Table of Contents Vivotek Overview Revision History Symbols and Statements in this Document Package ContentsRead Before Use Physical Description Front Panel Mounting the Lens to the Camera Mounting the Camera to Stand Digital Input Diagram Hardware Reset Power over Ethernet PoE Network Deployment Internet connection via a router Internet connection with static IP Software Installation Ready to Use Vivotek Installed into Housing Accessing the Network Camera Using Web Browsers Vivotek Tips Using Rtsp Players VLC Using 3GPP-compatible Mobile Devices MPEG-4 Using Vivotek Recording Software Main Configuration Area Resize ButtonsPage Go to Client Settings MP4 Saving Options Joystick settings Buttons Configuration Configuration System General settings System System time General settings System Homepage layout Theme Options Vivotek System Logs Log server settingsSystem log Internet Access log System Parameters General settings Upgrade firmware System MaintenanceGeneral settings Reboot General settings Restore Import/Export files Vivotek Vivotek Media Image Day/Night Settings Image settings Exposure BLC Select Enable and apply this profile to Privacy mask Stream settings Media Video MediaNOTE Video X2.1 Vivotek Vivotek Vivotek Vivotek Audio Settings Media Audio Network General settings Network Type Mega-pixel Network Camera Error Router does not support UPnP port forwarding Vivotek PPPoE Point-to-point over Ethernet Enable IPv6 Http//20010c08250000020202d1fffe0465f4 Port Talk Button Mute Mic Volume Network Streaming protocols Http streaming Rtsp Streaming VLC Vivotek Network Ddns Express link Manual setup Ddns Dynamic domain name service CustomSafe100 Network QoS Quality of Service Requirements for QoS QoS/DSCP the DiffServ model Snmp Configuration Network Snmp Simple Network Management Protocol Privilege Management Root PasswordSecurity User Account Account Management Create and Install Certificate Method Security Https Hypertext Transfer Protocol over SSL Https Create certificate request and install Vivotek Vivotek Vivotek Vivotek Security Access List Filter Administrator IP address Security Ieee Vivotek PTZ PTZ settings X1.2 X1.2 X1.2 X2.1 RS485 Settings PTZ Preset Positions Home page in Mechanical PTZ Mode Custom Command Event Event settings Event Trigger Action Add server Vivotek Vivotek Format is Yyyymmdd Click to open the directory Format is HH 24r Add media Trigger Activation Video20101213100341 Vivotek Customized Script Applications Motion detection Check Enable this profile Vivotek Applications Digital Input Applications Tampering detection Recording Recording settings Recording Settings Continuous recording NAS server Vivotek Recording file management SD card staus Local storage SD card managementSD card control Local storage Content management Searching and Viewing the Records Search Results Click to switch pages URL Commands for the Network Camera Appendix General CGI URL Syntax and Parameters Security Level Get Server Parameter Values Vivotek Set Server Parameter Values Value to assigned Assign value to the parameter groupname Vivotek Available parameters on the server System Group system Vivotek None Saving start time System.info Status Group status Security Digital input behavior defineGroup dii0~ndi-1capability.ndi Network Group network Subgroup of network ieee8021x capability.protocol.ieee8021x TLS Subgroup of network qosdscp capability.protocol.qos.dscp Subgroup of network qoscos capability.protocol.qos.cosSubgroup of network ipv6 capability.protocol.ipv6 Port Subgroup of network ftpSubgroup of network http Subgroup of network httpsport capability.protocol.https Rtsp Subgroup of network rtsp capability.protocol.rtsp Subgroup of network rtp IpfilterSubgroup of network sip capability.protocol.sip Subgroup of network pppoe capability.protocol.pppoe IPv6 address list Video inputIPv4 address list Group videoin Exposurelevel ~12 Exposure level Bit 1 = Built-in or external Svc is only supported with Stream Cmos Alternative video input profiles per channel Temporary settings for video preview Video input preview Lowlightmode Boolean Enable/disable low light mode Image setting per channelImage setting for preview Group imagec0~n-1for n channel products Audio input per channel Motion detection settings Group motionc0~n-1for n channel product Ddns Tampering detection settingsGroup ddns capability.ddns Ostname Express linkProviderh String128 System log UPnP presentationUPnP port forwarding Group syslog Snmp Group snmp capability.snmp Layout configuration Group layout Capability Privacy maskGroup privacymaskc0~n-1for n channel product Vivotek Bit 6 = Support iris Bit 0 = Support tilt Mjpeg Audioincodec VideoincodecVideooutcodec Transmissionmode Box, Both = DVR Customized event script Event settingGroup eventi0~2 Vivotek Path to store media Actioncfmedia NULL, 0~4 Server setting for event action Group serveri0~4 Media setting for event action Group mediai0~4 mediafreespace is used internally Recording Group recordingi0~1 Null Https Group https capability.protocol.https Storage management setting Region of interest EPTZ setting Group eptzc0~n-1for n channel product. capability.eptz Group ircutcontrol capability.nvideoinprofile IR cut controlUart control Group uart capability.nuart Vivotek Drive the Digital Output capability.ndo Query Status of the Digital Input capability.ndi Query Status of the Digital Output capability.ndo Do0=state\r\n Do1=state\r\n Do2=state\r\n Do3=state\r\n 3D Privacy Mask Parameter Value Default Description Capture Single Snapshot Account Management Upgrade Firmware System Logs Camera Control capability.ptzenabled Return=return Vivotek EPTZ Camera Control capability.eptz Channel ~n-1 Channel of video source Vivotek EPTZ Recall capability.eptz Recall capability.ptzenabledChannel ~n-1 Channel of the video source Stream ~m-1 Preset Locations capability.ptzenabled EPTZ Preset Locations capability.eptz IP Filtering IP Filtering for Onvif Type Uart Http Tunnel Channel capability.nuart Event/Control Http Tunnel Channel capability. evctrlchannel Channel ~ n-1 Channel number of Uart Get SDP of Streams Open the Network Stream Senddata capability.nuart Storage managements capability.storage.dbenabled Command search Parameter Value Description Command update Return Message DestPath/mnt/auto/NCMF/abc/abc.jpg/destPath Ex. Local storage status in XML format Ex. Local storage status in javascript format Command queryStatus FilePath is in queryststus return message Virtual input capability.nvi Return Parameter Value Default Description Open Anystream capability.nanystream Rtsp//10.0.0.1/live.sdp?maxsft=10&reftime=1230 Vivotek Remote Focus Upload Files Export FilesCurrentlanguage ~20 Stime Media on demandStart time Etime Play recordings for length seconds which start from Technical Specifications Technical Specifications Technology License Notice Electromagnetic Compatibility EMC Liability