VIVOTEK

Installed into Housing

1.Attach the bracket to the back of the camera by resting the foam pads on the top and to the back of the camera. Secure the bracket by driving a hex socket screw.

The camera can be installed into VIVOTEK's housings, such as the AE-211/-232/-233/-234/-235 series.

2.Attach the T-bracket and the camera to the camera bracket. Place the camera lens in the front as close as possible to the enclosure's tempered glass window. Secure the installation by tightening the hex socket screw on top.

User's Manual - 17

Page 17
Image 17
Vivotek IP8152 user manual Installed into Housing