Check Enable this profile | Vivotek IP8152 specs

VIVOTEK

A green bar indicates that even though motions have been detected, the event has not been triggered because the image variations still fall under the defined threshold.

Percentage = 30%

If you want to configure other motion detection settings for a different time period within a day, please click Profile to open the Motion Detection Profile Settings page as shown below. A total of three motion detection windows can be configured on this page as well.

Video(TCP-AV)

2010/12/10 17:08:56

corridor

Please follow the steps beolw to set up a profile and additional motion detectio windows in it:

1.Create a new motion detection window.

2.Check Enable this profile.

3.Select the applicable span of time in Day, Night, or the Schedule mode. Please manually enter a time range if you choose Schedule mode.

4.Click Save to enable the settings and click Close to exit the page.

This motion detection window will also be displayed on the Event Settings page. You can go to Event

>Event settings > Trigger to configure it as a trigger source. Please refer to page 117 for detailed information.

User's Manual - 113

Image 113

Contents

Rev Table of Contents Vivotek Revision History Overview Read Before Use Package ContentsSymbols and Statements in this Document Front Panel Physical Description Mounting the Lens to the Camera Mounting the Camera to Stand Digital Input Diagram Hardware Reset Network Deployment Power over Ethernet PoE Internet connection via a router Internet connection with static IP Software Installation Ready to Use Vivotek Installed into Housing Using Web Browsers Accessing the Network Camera Vivotek Tips VLC Using Rtsp Players MPEG-4 Using 3GPP-compatible Mobile Devices Using Vivotek Recording Software Main Resize Buttons Configuration AreaPage Go to Client Settings MP4 Saving Options Joystick settings Buttons Configuration Configuration System System General settings System time System Homepage layout General settings Theme Options Vivotek System log Log server settingsSystem Logs Internet System Parameters Access log General settings Reboot System MaintenanceGeneral settings Upgrade firmware Import/Export files General settings Restore Vivotek Vivotek Media Image Day/Night Settings Image settings Exposure BLC Select Enable and apply this profile to Privacy mask Media Video Stream settings X2.1 MediaNOTE Video Vivotek Vivotek Vivotek Vivotek Media Audio Audio Settings Network Type Network General settings Mega-pixel Network Camera Error Router does not support UPnP port forwarding Vivotek PPPoE Point-to-point over Ethernet Enable IPv6 Http//20010c08250000020202d1fffe0465f4 Port Talk Button Mute Mic Volume Http streaming Network Streaming protocols Rtsp Streaming VLC Vivotek Express link Network Ddns Ddns Dynamic domain name service Manual setup CustomSafe100 Requirements for QoS Network QoS Quality of Service QoS/DSCP the DiffServ model Network Snmp Simple Network Management Protocol Snmp Configuration Security User Account Root PasswordPrivilege Management Account Management Security Https Hypertext Transfer Protocol over SSL Create and Install Certificate Method Https Create certificate request and install Vivotek Vivotek Vivotek Vivotek Security Access List Filter Administrator IP address Security Ieee Vivotek X1.2 PTZ PTZ settings X1.2 X1.2 X2.1 PTZ RS485 Settings Preset Positions Home page in Mechanical PTZ Mode Custom Command Event Event Event settings Trigger Action Add server Vivotek Vivotek Format is Yyyymmdd Click to open the directory Format is HH 24r Add media Trigger Activation Video20101213100341 Vivotek Customized Script Applications Motion detection Check Enable this profile Vivotek Applications Tampering detection Applications Digital Input Recording Settings Recording Recording settings Continuous recording NAS server Vivotek Recording file management SD card control Local storage SD card managementSD card staus Searching and Viewing the Records Local storage Content management Search Results Click to switch pages Appendix URL Commands for the Network Camera General CGI URL Syntax and Parameters Security Level Get Server Parameter Values Vivotek Value to assigned Assign value to the parameter groupname Set Server Parameter Values Vivotek Available parameters on the server Group system System Vivotek None Saving start time System.info Group status Status Group dii0~ndi-1capability.ndi Digital input behavior defineSecurity Group network Network TLS Subgroup of network ieee8021x capability.protocol.ieee8021x Subgroup of network ipv6 capability.protocol.ipv6 Subgroup of network qoscos capability.protocol.qos.cosSubgroup of network qosdscp capability.protocol.qos.dscp Subgroup of network http Subgroup of network ftpPort Subgroup of network httpsport capability.protocol.https Subgroup of network rtsp capability.protocol.rtsp Rtsp Subgroup of network sip capability.protocol.sip IpfilterSubgroup of network rtp Subgroup of network pppoe capability.protocol.pppoe IPv4 address list Video inputIPv6 address list Group videoin Bit 1 = Built-in or external Exposurelevel ~12 Exposure level Stream Svc is only supported with Cmos Alternative video input profiles per channel Video input preview Temporary settings for video preview Image setting for preview Image setting per channelLowlightmode Boolean Enable/disable low light mode Group imagec0~n-1for n channel products Audio input per channel Group motionc0~n-1for n channel product Motion detection settings Group ddns capability.ddns Tampering detection settingsDdns Providerh Express linkOstname String128 UPnP port forwarding UPnP presentationSystem log Group syslog Group snmp capability.snmp Snmp Group layout Layout configuration Group privacymaskc0~n-1for n channel product Privacy maskCapability Vivotek Bit 6 = Support iris Bit 0 = Support tilt Mjpeg Videooutcodec VideoincodecAudioincodec Transmissionmode Box, Both = DVR Group eventi0~2 Event settingCustomized event script Vivotek Path to store media Actioncfmedia NULL, 0~4 Group serveri0~4 Server setting for event action Group mediai0~4 mediafreespace is used internally Media setting for event action Group recordingi0~1 Recording Null Group https capability.protocol.https Https Region of interest Storage management setting Group eptzc0~n-1for n channel product. capability.eptz EPTZ setting Uart control IR cut controlGroup ircutcontrol capability.nvideoinprofile Group uart capability.nuart Vivotek Query Status of the Digital Input capability.ndi Drive the Digital Output capability.ndo Do0=state\r\n Do1=state\r\n Do2=state\r\n Do3=state\r\n Query Status of the Digital Output capability.ndo 3D Privacy Mask Capture Single Snapshot Parameter Value Default Description Account Management System Logs Upgrade Firmware Return=return Camera Control capability.ptzenabled Vivotek Channel ~n-1 Channel of video source EPTZ Camera Control capability.eptz Vivotek Channel ~n-1 Channel of the video source Stream ~m-1 Recall capability.ptzenabledEPTZ Recall capability.eptz Preset Locations capability.ptzenabled IP Filtering EPTZ Preset Locations capability.eptz Type IP Filtering for Onvif Uart Http Tunnel Channel capability.nuart Channel ~ n-1 Channel number of Uart Event/Control Http Tunnel Channel capability. evctrlchannel Open the Network Stream Get SDP of Streams Senddata capability.nuart Command search Storage managements capability.storage.dbenabled Parameter Value Description Return Message Command update DestPath/mnt/auto/NCMF/abc/abc.jpg/destPath Ex. Local storage status in javascript format Ex. Local storage status in XML format FilePath is in queryststus return message Command queryStatus Return Virtual input capability.nvi Parameter Value Default Description Rtsp//10.0.0.1/live.sdp?maxsft=10&reftime=1230 Open Anystream capability.nanystream Vivotek Remote Focus Currentlanguage ~20 Export FilesUpload Files Start time Etime Media on demandStime Play recordings for length seconds which start from Technical Specifications Technical Specifications Technology License Notice Liability Electromagnetic Compatibility EMC