Media Image, General settings | Vivotek IP8152 manual

VIVOTEK

Media > Image

Advanced Mode

This section explains how to configure the image settings of the Network Camera. It is composed of the following four columns: General settings, Image settings, Exposure, and Privacy mask.

General settings

Video title: Enter a name that will be displayed on the title bar of the live video as the picture shown below.

Show timestamp and video title in videos and snapshots: Select this checkbox if you prefer video

title and time stamp to display in videos and snapshots.

A zoom indicator will be displayed on the Home page when you zoom in/out on the live viewing window as shown below. You may zoom in/out on the image by scrolling the mouse wheel inside the live viewing window, and the maximum zoom in will be up to 12 times.

Video Title

Title and Time

2012/06/09 17:08:56

Video 17:08:56 2012/06/09

		Zoom Out
Zoom In		Zoom Out

Zoom Factor		X2.1

Color: Select to display color or black/white video streams.

Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image flickering associated with fluorescent lights. Note that after the power line frequency is changed, you must disconnect and reconnect the power cord of the Network Camera in order for the new setting to take effect.

Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the display of the live video. Select both options if the Network Camera is installed upside-down (e.g., on the ceiling) to correct the image orientation. Please note that if you have configured preset locations, those locations will be cleared after flip/mirror setting.

User's Manual - 45

Image 45

Vivotek IP8152 user manual Media Image, General settings

Contents

Rev Table of Contents Vivotek Revision History Overview Package Contents Symbols and Statements in this DocumentRead Before Use Front Panel Physical Description Mounting the Lens to the Camera Mounting the Camera to Stand Digital Input Diagram Hardware Reset Network Deployment Power over Ethernet PoE Internet connection via a router Internet connection with static IP Software Installation Ready to Use Vivotek Installed into Housing Using Web Browsers Accessing the Network Camera Vivotek Tips VLC Using Rtsp Players MPEG-4 Using 3GPP-compatible Mobile Devices Using Vivotek Recording Software Main Resize Buttons Configuration AreaPage Go to Client Settings MP4 Saving Options Joystick settings Buttons Configuration Configuration System System General settings System time System Homepage layout General settings Theme Options Vivotek Log server settings System LogsSystem log Internet System Parameters Access log System Maintenance General settings Upgrade firmwareGeneral settings Reboot Import/Export files General settings Restore Vivotek Vivotek Media Image Day/Night Settings Image settings Exposure BLC Select Enable and apply this profile to Privacy mask Media Video Stream settings X2.1 MediaNOTE Video Vivotek Vivotek Vivotek Vivotek Media Audio Audio Settings Network Type Network General settings Mega-pixel Network Camera Error Router does not support UPnP port forwarding Vivotek PPPoE Point-to-point over Ethernet Enable IPv6 Http//20010c08250000020202d1fffe0465f4 Port Talk Button Mute Mic Volume Http streaming Network Streaming protocols Rtsp Streaming VLC Vivotek Express link Network Ddns Ddns Dynamic domain name service Manual setup CustomSafe100 Requirements for QoS Network QoS Quality of Service QoS/DSCP the DiffServ model Network Snmp Simple Network Management Protocol Snmp Configuration Security User Account Root PasswordPrivilege Management Account Management Security Https Hypertext Transfer Protocol over SSL Create and Install Certificate Method Https Create certificate request and install Vivotek Vivotek Vivotek Vivotek Security Access List Filter Administrator IP address Security Ieee Vivotek X1.2 PTZ PTZ settings X1.2 X1.2 X2.1 PTZ RS485 Settings Preset Positions Home page in Mechanical PTZ Mode Custom Command Event Event Event settings Trigger Action Add server Vivotek Vivotek Format is Yyyymmdd Click to open the directory Format is HH 24r Add media Trigger Activation Video20101213100341 Vivotek Customized Script Applications Motion detection Check Enable this profile Vivotek Applications Tampering detection Applications Digital Input Recording Settings Recording Recording settings Continuous recording NAS server Vivotek Recording file management Local storage SD card management SD card stausSD card control Searching and Viewing the Records Local storage Content management Search Results Click to switch pages Appendix URL Commands for the Network Camera General CGI URL Syntax and Parameters Security Level Get Server Parameter Values Vivotek Value to assigned Assign value to the parameter groupname Set Server Parameter Values Vivotek Available parameters on the server Group system System Vivotek None Saving start time System.info Group status Status Digital input behavior define SecurityGroup dii0~ndi-1capability.ndi Group network Network TLS Subgroup of network ieee8021x capability.protocol.ieee8021x Subgroup of network qoscos capability.protocol.qos.cos Subgroup of network qosdscp capability.protocol.qos.dscpSubgroup of network ipv6 capability.protocol.ipv6 Subgroup of network http Subgroup of network ftpPort Subgroup of network httpsport capability.protocol.https Subgroup of network rtsp capability.protocol.rtsp Rtsp Subgroup of network sip capability.protocol.sip IpfilterSubgroup of network rtp Subgroup of network pppoe capability.protocol.pppoe IPv4 address list Video inputIPv6 address list Group videoin Bit 1 = Built-in or external Exposurelevel ~12 Exposure level Stream Svc is only supported with Cmos Alternative video input profiles per channel Video input preview Temporary settings for video preview Image setting for preview Image setting per channelLowlightmode Boolean Enable/disable low light mode Group imagec0~n-1for n channel products Audio input per channel Group motionc0~n-1for n channel product Motion detection settings Tampering detection settings DdnsGroup ddns capability.ddns Providerh Express linkOstname String128 UPnP port forwarding UPnP presentationSystem log Group syslog Group snmp capability.snmp Snmp Group layout Layout configuration Privacy mask CapabilityGroup privacymaskc0~n-1for n channel product Vivotek Bit 6 = Support iris Bit 0 = Support tilt Mjpeg Videooutcodec VideoincodecAudioincodec Transmissionmode Box, Both = DVR Event setting Customized event scriptGroup eventi0~2 Vivotek Path to store media Actioncfmedia NULL, 0~4 Group serveri0~4 Server setting for event action Group mediai0~4 mediafreespace is used internally Media setting for event action Group recordingi0~1 Recording Null Group https capability.protocol.https Https Region of interest Storage management setting Group eptzc0~n-1for n channel product. capability.eptz EPTZ setting Uart control IR cut controlGroup ircutcontrol capability.nvideoinprofile Group uart capability.nuart Vivotek Query Status of the Digital Input capability.ndi Drive the Digital Output capability.ndo Do0=state\r\n Do1=state\r\n Do2=state\r\n Do3=state\r\n Query Status of the Digital Output capability.ndo 3D Privacy Mask Capture Single Snapshot Parameter Value Default Description Account Management System Logs Upgrade Firmware Return=return Camera Control capability.ptzenabled Vivotek Channel ~n-1 Channel of video source EPTZ Camera Control capability.eptz Vivotek Recall capability.ptzenabled EPTZ Recall capability.eptzChannel ~n-1 Channel of the video source Stream ~m-1 Preset Locations capability.ptzenabled IP Filtering EPTZ Preset Locations capability.eptz Type IP Filtering for Onvif Uart Http Tunnel Channel capability.nuart Channel ~ n-1 Channel number of Uart Event/Control Http Tunnel Channel capability. evctrlchannel Open the Network Stream Get SDP of Streams Senddata capability.nuart Command search Storage managements capability.storage.dbenabled Parameter Value Description Return Message Command update DestPath/mnt/auto/NCMF/abc/abc.jpg/destPath Ex. Local storage status in javascript format Ex. Local storage status in XML format FilePath is in queryststus return message Command queryStatus Return Virtual input capability.nvi Parameter Value Default Description Rtsp//10.0.0.1/live.sdp?maxsft=10&reftime=1230 Open Anystream capability.nanystream Vivotek Remote Focus Export Files Upload FilesCurrentlanguage ~20 Media on demand StimeStart time Etime Play recordings for length seconds which start from Technical Specifications Technical Specifications Technology License Notice Liability Electromagnetic Compatibility EMC