Vivotek IP8362 manual IR cut control, Image setting per channel

VIVOTEK

7.10 IR cut control

Group: ircutcontrol (capability.nvideoinprofile > 0)

NAME	VALUE	SECURITY	DESCRIPTION
		(get/set)
mode	auto,	6/6	Set IR cut control mode
	day,
	night,
	di,
	schedule
	<product
	dependent>
daymodebegintime	00:00~23:59	6/6	Day mode begin time
daymodeendtime	00:00~23:59	6/6	Day mod end time
disableirled	<boolean>	6/6	Enable/disable built-in IR LED.
bwmode	<boolean>	6/6	Switch to B/W in night mode if enabled
sensitivity	low,	6/6	Sensitivity of light sensor
	normal,
	high

7.11 Image setting per channel

Group: image_c<0~(n-1)>for n channel products

NAME	VALUE	SECURITY	DESCRIPTION
		(get/set)
brightness	-5~5	4/4	Adjust brightness of image according to mode settings.
saturation	-5~5,100	4/4	Adjust saturation of image according to mode settings.
			100 for saturation percentage mode.
saturationpercent	0~100	4/4	Adjust saturation value of percentage when
			saturation=100
contrast	-5 ~ 5	4/4	Adjust contrast of image according to mode settings.
sharpness	-3~3,100	4/4	Adjust sharpness of image according to mode settings.
			100 for sharpness percentage mode.
sharpnesspercent	0~100	4/4	Adjust sharpness value of percentage when
			sharpness=100
gammacurve	0~100	4/4	Gamma curve.
lowlightmode	<boolean>	4/4	Enable/disable low light mode.
profile_i0_enable	<boolean>	4/4	Enable/disable this profile setting
profile_i0_policy	day,	4/4	The mode which the profile is applied to.

136 - User's Manual