Vivotek IP8362 manual Virtual input capability.nvi

VIVOTEK

8.22 Virtual input (capability.nvi > 0)

Note: Change virtual input (manual trigger) status.

Method: GET

Syntax:

http://<servername>/cgi-bin/admin/setvi.cgi?vi0=<value>[&vi1=<value>][&vi2=<value>] [&return=<return page>]

PARAMETER	VALUE		DESCRIPTION
vi<num>	state[(duration)nstate]		Ex: vi0=1
			Setting virtual input 0 to trigger state
	Where "state" is 0, 1. “0”
			Ex: vi0=0(200)1
	means inactive or normal		Setting virtual input 0 to normal state, waiting 200
	state while “1” means active		milliseconds, setting it to trigger state.
	or triggered state.		Note that when the virtual input is waiting for next state, it
	Where "nstate" is next state		cannot accept new requests.
	after duration.
return	<return page>		Redirect to the page <return page> after the request is
			completely assigned. The <return page> can be a full URL
			path or relative path according the current path. If you
			omit this parameter, it will redirect to an empty page.
Return Code		Description
200		The request is successfully executed.
400		The request cannot be assigned, ex. incorrect parameters.
		Examples:
		setvi.cgi?vi0=0(10000)1(15000)0(20000)1
		No multiple duration.
		setvi.cgi?vi3=0
		VI index is out of range.
		setvi.cgi?vi=1
		No VI index is specified.
503		The resource is unavailable, ex. Virtual input is waiting for next state.
		Examples:
		setvi.cgi?vi0=0(15000)1
		setvi.cgi?vi0=1
		Request 2 will not be accepted during the execution time(15 seconds).

178 - User's Manual