VIVOTEK
User's Manual - 73
Auto: If you set Exposure mode as Auto, the Exposure time and Gain control will be not congurable
since the sensor library will automatically adjust the value according to the ambient light. Then you can
set iris mode as "indoor" or "outdoor" to reach the best image quality.
You can click Preview to fine-tune the image, or click Restore to recall the original settings without
incorporating the changes. When completed with the settings on this page, click Save to enable the
settings.
If you want to congure another sensor setting for day/night/schedule mode, please click Prole to open
the Prole settings page as shown below.
Please follow the steps below to setup a prole:
1. Check Enable and apply this prole.
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a range
of time if you choose Schedule mode.
3. Congure Exposure control settings in the folowing columns. Please refer to the last page for detailed
information.
4. Click Save to enable the setting and click Close to exit the page.
2011/03/13 17:08:56