VIVOTEK
52 - User's Manual
This section explains how to control the Network Camera's Pan/Tilt operation by connecting with a
PTZ scanner�
RS-485 Settings
Enable PTZ Operation :Select this option to enable PTZ operation�
To utilize this feature, please connect the Network Camera with a PTZ scanner via RS485 interface
first� VIVOTEK offers three PTZ drivers: DynaDome/SmartDOME, Lilin PIH-7x00 and Pelco D
protocol� If none of the above PTZ drivers is supported by your PTZ scanner, please select Custom
camera�
1:Refer to your PTZ scanner, set the Camera ID, PTZ driver, Port settings�
2:Select Enable PTZ Operation and then click Save to take effect�
3:The PTZ control buttons will be displayed in the main page�
PTZ control buttons
Pan / Tilt speed
Preset position
PTZ control buttons :
▲:Move the Network Camera up�
▼:Move the Network Camera down�
◄:Move the Network Camera left�
►:Move the Network Camera right�