Vivotek IZ7151 user manual Drive the Digital Output

				VIVOTEK
endtime	hh:mm	6/6	End time of the weekly schedule.
			(00:00~24:00 indicates schedule always on)
prefix	string[16]	6/6	Indicate the prefix of the filename.
cyclesize	<integer>	6/6	The maximum size for cycle recording in Kbytes
			when choosing to limit recording size.
maxfilesize	200~6000	6/6	The max size for one file in Kbytes
dest	0~4	6/6	The destination to store the recorded data.
			“0~4” means the index of the network storage.

Group: path

NAME	VALUE		SECURITY	DESCRIPTION
			(get/set)
encoder1_start	<boolean>	7/7		Specify the HTTP push server is active for stream 1
encoder2_start	<boolean>	7/7		Specify the HTTP push server is active for stream 2

Drive the Digital Output

Note: This request requires Viewer privileges.

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/dido/setdo.cgi?do1=<state>[&do2=<state>] [&do3=<state>][&do4=<state>][&return=<return page>]

Where state is 0 or 1; “0” means inactive or normal state, while “1” means active or triggered state.

PARAMETER	VALUE	DESCRIPTION
do<num>	0, 1	0	– Inactive, normal state
		1	– Active, triggered state
return	<return page>	Redirect to the page <return page> after the parameter is assigned. The
		<return page> can be a full URL path or relative path according to the
		current path. If you omit this parameter, it will redirect to an empty page.

Example: Drive the digital output 1 to triggered state and redirect to an empty page.

http://myserver/cgi-bin/dido/setdo.cgi?do1=1

User's Manual - 99