Using your range Using the Surface Units
PUSH IN
Control knobs must be pushed in
before turning them to a setting. They
can be set anywhere between HI
and OFF.
Surface Unit Markers
The solid dot in the surface unit
marker shows which surface unit is
turned on by that knob.
Surface Heating
Indicator light
The SURFACE HEATING Indicator Light
on the control panel will glow when
a surface unit is on.
Burn and Fire Hazard
Be sure all control knobs are
turned to OFF and all indicator
lights are OFF when you are not
cooking. Someone could be
burned or a fire could start if a
surface unit is accidentally
letl ON.
Until you get used to the settings, use the following as a guide. For best
reSUlts, start cooking at the high settings; then turn the control knob down to
continue cooking.
Use HI to start Use MED-HI Use MED for Use MED-LO Use LO to
foods cook- to hold a gravy, pud-
ing; to bring to keep food keep food
rapid boil; to dings and
liquids to a cooking after warm until
fry chicken or
boil. icing; to starting it ready to
pancakes. cook large on a higher serve. Set the
amounts of setting. heat higher
vegetables. or lower
within the LO
band to keep
food at the
temperature
you want.