VIVOTEK
User's Manual - 27
Network
This section explains how to configure wired network connection for the Network Camera� It is
composed of the following five columns: Network Type, HTTP, Two way audio, FTP and RTSP
Streaming� When completed with the settings on this page, click Save to take effect�

Network Type

LAN
Select this option when the Network Camera is deployed in a local area network and is intended to
be accessed by local computers�
Get IP address automatically :Select this option to obtain an available dynamic IP address
assigned by a DHCP server each time the camera is connected to the local area network�
Use fixed IP address :Select this option to manually assign a static IP address to the Network
Camera� See Internet connection with static IP on page 9 for details�
Enable UPnP presentation :Select this option to enable UPnPTM presentation for your Network
Camera so that whenever a Network Camera is presented to the local area network, shortcuts of
connected Network Cameras will show up at My Network Places� Currently, UPnPTM is supported
by Windows XP or later� Note that to utilize this feature, please make sure the UPnPTM components
is enabled on your computer�
Enable UPnP port forwarding :To access the Network Camera from the Internet, select this option
to allow the Network Camera to open ports on the router automatically so that video streams can
be sent out from a local area network� To utilize of this feature, make sure that your router supports
UPnPTM and it is activated�