VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 19
Auto search by device installer or manually install in LAN
If your devices are linked to the LAN port of the Network video Recorder, you can follow the
steps below to add a new device by the Installer:
1� Select Add new on the drop-down list
2� Click Start Searching� The searching results will be displayed in the following column� You can click
Stop Searching if the linked devices are all displayed on the list�
3� Select a device to be inserted� Modify the Device Name if necessary�
4� Click Add Device to enable the settings�
You can also manually install a new device in LAN�
Please follow the steps below:
1� Select Add new on the drop-down list
2� Enter the Device Name�
3� Enter the Username/Password if the device needs to do authentication�
4� Select the Device Type� Please refer to page 18 for support list�
5� Enter the MAC Address of the device in the format as xx:xx:xx:xx:xx:xx�
6� Enter the HTTP Port for the device�
7� Click Save to enable the settings�
1
2
3
4