URL commands of the Network Camera | Vivotek PT71373GPP/ISMA

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Restoring the factory defaults will erase any previous settings.

B. URL commands of the Network Camera

For some customers who already have their own web site or web control application, the Network Camera can be easily integrated through convenient URLs. This section lists the commands in URL format corresponding to the basic functions of the Network Camera.

Get server parameter values

Note: This request require administrator access

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/admin/getparam.cgi?[<parameter>] [&<parameter>…]

where the <parameter> should be <group>[_<name>] or <group>[.<name>] If you do not specify the any parameters, all the parameters on the server will be returned. If you specify only <group>, the parameters of related group will be returned.

When query parameter values, the current parameter value are returned. Successful control requests returns parameter pairs as follows.

Return:

HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: <length>\r\n \r\n

<parameter pair>

- 58 -

www.vivotek.com

User's Manual - 58

Image 59

Vivotek PT71373GPP/ISMA manual URL commands of the Network Camera, Get server parameter values, Method GET/POST

Contents

Wireless Pan/Tilt Network Camera PT7137 Before You Use This Product Table of Contents FTP 886-2-82455282 886-2-82455532 Package Contents Hardware installation Installation To install in Ethernet Software Installation Page Page Page Add Password to Prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings Authentication How to Use Installing plug-in Main Screen with Camera View Primary user’s capability Client Settings Configuration Stop Patrol Pan speedTilt speed Pan Client settings Page Url http//Network Camera/client.html Fine-tuning for Best Performance Administrator’s capability For Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Opening accounts for new users Protect Network Camera by passwords Build a security application Software revision upgrade Definitions in Configuration System parameters Security settings Get IP address automatically & Use fixed IP address Network settingsNetwork type LAN & PPPoE Rtsp Streaming HttpPage Url http//Network Camera/setup/network.html Wlan Configuration Tkip AES Url http//Network Camera/setup/wireless.html Ddns Access List Video orientation Video SettingsAudio and Video General Audio settings Image Settings Camera control area Camera Control Preset function area FTP Email & FTP This value from 1025 to Motion detection Snapshot Application settings Sequential operation Weekly scheduleSnapshot file name prefix Send out the snapshot while motion detectionPage Video Clip Page System log Viewing system parameters Calibrate Maintenance Status LED TroubleshootingReset and restore Method GET/POST URL commands of the Network CameraGet server parameter values Return Set server parameter values Where parameter pair is parameter=value\r\n Yyyy/mm/dd WirelessNetwork CameraSkip to invoke default server Available parameters on the server Blank Group Security 255.255.255.0 192.168.0.99 Than 40 characters 5558 Group Wireless restartDefault 554 0.0 000000000000000000 Group IPFilter Computer 256176x144 for mobile 640x480 For For 60Hz only 512000 12200 AAC4 for computerGamr for mobile Tilt speed To take effect 514 Camera ControlScript.vssx IP address Syntax Recall Application page CGI command Page Maxsize Prefixappindex Account management Capture single snapshot Privilege=conf System logs Configuration file Post data Upgrade firmware Networking Technical specifications Technology License Notice Liability Electromagnetic Compatibility EMC