| 5: Commands and Levels |
|
|
block network enable | Discards all data coming in from the accept mode tunnel |
| before forwarding |
block serial disable | Forwards (tunnels) serial data in accept mode tunneling. |
block serial enable | Discards all data coming in from the serial interface before |
| forwarding |
clrscrn | Clears the screen. |
default accept mode | Restores the default accept mode as "always". |
default protocol | Restores the default protocol as "TCP". |
default tcp keep alive | Restores the default 45 second accept mode TCP keep |
| alive timeout. |
email connect <number> | Sets an email profile to use to send an email alert upon |
| establishing |
email disconnect <number> | Sets an email profile to use to send an email alert upon |
| closing |
exit | Returns to the tunnel level. |
flush serial disable | Characters already in the serial data buffer are retained |
| upon establishing |
flush serial enable | Flushes the serial data buffer upon establishing an accept |
| mode tunneling |
kill connection | Disconnects the active accept mode tunneling connection. |
local port <number> | Sets the port to use for accept mode tunneling. |
no aes decrypt key | Removes the accept tunnel AES decrypt key. |
no aes encrypt key | Removes the accept tunnel AES encrypt key. |
no email connect | Discontinues sending email alerts upon establishing an |
| accept mode tunnel. |
no email disconnect | Discontinues sending email alerts upon closing an accept |
| mode tunnel. |
no local port | Uses the default port number as the local port for accept |
| mode tunneling. |
no tcp keep alive | Disables the accept mode TCP keep alive timeout. |
output select | Enters the next lower level. |
password | Enters the next lower level. |
protocol ssh | Uses SSH protocol for accept mode tunneling. |
protocol ssl | Uses SSL protocol for accept mode tunneling. |
protocol tcp | Uses TCP protocol for accept mode tunneling. |
protocol tcp aes | Uses TCP protocol with AES encryption for accept mode |
| tunneling. |
protocol telnet | Uses Telnet protocol (with IAC) for accept mode tunne- |
| ling. |
rss trace connections disable | Disables RSS Trace of accept mode connections. |
rss trace connections enable | Enables RSS Trace of accept mode connections. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
show status | Displays tunnel accept status. |
tcp keep alive <milliseconds> | Enables TCP keep alive for accept mode tunneling and |
| sets the timer. |
write | Stores the current configuration in permanent memory. |
accept |
|
|
|
50 |
