5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 61
auto show tlog
Continuously displays the internal trouble log.
auto show upload
Continuously displays the status of firmware upload.
clrscrn
Clears the screen.
cpu speed <mhz>
Sets the CPU speed.
default cpu speed
Restores the default CPU clock rate.
default long name
Restores the default product long name.
default short name
Restores the default product short name.
exit
Exit to the enable level.
long name <name> Sets the product long name, displayed in command mode
and the Web interface.
short name <name>
Sets the product short name, displayed in command mode
and the Web interface.
show
Show system information
show buffer pool
Displays information about the various buffer pools.
show codefile memory
Displays memory utilization by code files.
show delta memory
Displays differences in memory utilization by code files or
line reference.
show hardware information
Displays information about the hardware.
show history
Displays the last 20 commands entered during the current
CLI session.
show ibio2100
Show system information
show linereference memory <code filename>
Displays memory utilization by line reference for one code
file.
show memory
Displays current memory usage information.
show task memory
Displays task memory utilization.
show task state
Displays current task states.
show tlog
Displays the internal trouble log.
show upload
Displays the status of firmware upload.
write
Stores the current configuration in permanent memory.
disconnect (tunnel-disconnect:2) level commands
character stop disable
Does not watch for a stop character to disconnect.
character stop enable
Watches for a stop character to disconnect.
clrscrn
Clears the screen.
exit
Returns to the tunnel level.
flush serial disable
Does not flush serial data upon closing a tunneling con-
nection.
flush serial enable Flushes serial data buffer when a tunneling connection is
closed.
modem control disable
Does not watch the modem control pin to disconnect.
modem control enable
Watches the modem control pin and disconnects if it is not
asserted.
no timeout
Disables disconnect after timeout feature for tunneling
sessions.
show
Displays the current configuration.
show history Displays the last 20 commands en
tered during the current
CLI session.
timeout <milliseconds> Disconnects when no data has been received on the line
(serial port) for the
write
Stores the current configuration in permanent memory.