5: Commands and Levels

 

 

file> <host> <port>

 

touch <file>

Create a file

ftp (config-ftp) level commands

 

admin password <string>

Sets the administrative password for the FTP server.

admin username <string>

Sets the administrative username for the FTP server.

clear counters

Zeros FTP counters.

clrscrn

Clears the screen.

default admin password

Resets the FTP password to the default (PASS).

default admin username

Resets the FTP username to the default (admin).

exit

Returns to the config level.

no clear counters

Unzeros FTP counters.

show

Displays the FTP settings and statistics.

show history

Displays the last 20 commands entered during the current

 

CLI session.

state disable

Disables the FTP server.

state enable

Enables the FTP server.

write

Stores the current configuration in permanent memory.

host 1 (config-host:1) level commands

 

clrscrn

Clears the screen.

default protocol

Restores the default value of the protocol (Telnet).

default remote port

Sets the remote port (used to connect to the host) to the

 

default value,

exit

Exits to the configuration level.

host <number>

Change to config host level

name <text>

Sets the name of the host.

no name

Clears the name of the host.

no remote address

Clears the remote address of the host.

no ssh username

Clears the SSH username associated with the host.

protocol ssh

Sets the protocol to SSH.

protocol telnet

Sets the protocol to Telnet.

remote address <text>

Sets the IP address of the remote host to connect to when

 

this host is

remote port <number>

Sets the remote port used to connect to the host.

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current

 

CLI session.

ssh username <text>

Sets the username for logging into the host via SSH.

write

Stores the current configuration in permanent memory.

host 2 (config-host:2) level commands

 

clrscrn

Clears the screen.

default protocol

Restores the default value of the protocol (Telnet).

default remote port

Sets the remote port (used to connect to the host) to the

 

default value,

exit

Exits to the configuration level.

host <number>

Change to config host level

name <text>

Sets the name of the host.

no name

Clears the name of the host.

IntelliBox-I/O 2100 Command Reference

65

Page 65
Image 65
Lantronix 2100 manual File host port Touch file Create a file, CLI session, This host is