
| 5: Commands and Levels |
|
|
| CLI session. |
threshold <bytes> | Sets the threshold (byte count). If the queued data reach- |
| es this threshold |
timeout <milliseconds> | Sets the timeout value for packing mode in milliseconds. |
trailing character <control> | Sets the trailing character for packing mode. |
write | Stores the current configuration in permanent memory. |
packing |
|
clrscrn | Clears the screen. |
default packing mode | Sets to default packing mode, which is "Disable" |
default threshold | Restores the default threshold. |
default timeout | Restores the default packing mode timeout. |
exit | Returns to the tunnel level. |
no send character | Removes the send character for packing mode. |
no trailing character | Removes the trailing character for packing mode. |
packing mode disable | Disables packing. Data is sent to the network when re- |
| ceived. |
packing mode send character | Sets packing mode to accumulate data and transmit it |
| upon receiving the |
packing mode timeout | Sets packing mode to accumulate data and transmit it |
| after a specified |
send character <control> | Sets the send character for packing mode. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
threshold <bytes> | Sets the threshold (byte count). If the queued data reach- |
| es this threshold |
timeout <milliseconds> | Sets the timeout value for packing mode in milliseconds. |
trailing character <control> | Sets the trailing character for packing mode. |
write | Stores the current configuration in permanent memory. |
query port |
|
clrscrn | Clears the screen. |
exit | Returns to the config level. |
show | Displays statistics and information about the query port. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
state disable | Disables response to 77FE requests. |
state enable | Permits response to 77FE requests. |
write | Stores the current configuration in permanent memory. |
root level commands |
|
clrscrn | Clears the screen. |
enable | Enters the enable level. |
exit | Exit from the system |
ping <host> | Ping destination 5 times with 5 second timeout |
ping <host> <count> | Ping destination n times with 5 second timeout |
ping <host> <count> <timeout> | Ping destination n times with x timeout (in seconds) |
show | Show system information |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
82 |