
| 5: Commands and Levels |
|
|
command mode echo serial string disable | Disables |
| the CLI. |
command mode echo serial string enable | Enables |
| CLI. |
command mode serial string | Enables user to enter a custom string at boot time to enter |
| command mode. |
command mode serial string <string> | Sets a string that can be entered at boot time to enter |
| command mode. |
command mode serial string binary <string> | Sets a binary string that can be entered at boot time to |
| enter command mode. |
command mode signon message <string> | Sets an ASCII |
| al port when the |
command mode signon message binary <string> | Sets a binary |
| port when the |
command mode wait time <milliseconds> | Sets |
data bits 7 | Uses seven bits for data on the line. |
data bits 8 | Uses eight bits for data on the line. |
default baud rate | Restores the default speed of 9600 bits per second. |
default data bits | Restores the default of eight data bits. |
default flow control | Restores the default of no flow control. |
default interface | Restores the default interface type to this line. |
default parity | Restores the default of no parity. |
default protocol | Restores the default protocol on the line. |
default stop bits | Restores the default of one stop bit. |
default xoff char | Restores the default xoff character on this line. |
default xon char | Restores the default xon character on this line. |
exit | Exits to the enable level |
flow control hardware | Uses hardware (RTS/CTS) flow control on the line. |
flow control none | Does not provide flow control on the line. |
flow control software | Uses software (xon/xoff characters) flow control on the |
| line. |
interface rs232 | Sets the line interface to RS232. |
interface rs485 | Sets the line interface to RS485 in |
interface rs485 | Sets the line interface to RS485 in |
line <line> | Enters the line level. |
lpd <line> | Enters the configure lpd level. |
name <text> | Sets the name for this line. |
no clear line counters | Restores the serial counters to the aggregate values. |
no command mode | Disables command mode for the current line. |
no command mode serial string | Prevents the |
| used to enter |
no command mode signon message | Clears the signon message displayed at boot time and |
| when entering |
no name | Removes the name of this line. |
parity even | Uses a parity bit on the line for even parity. |
parity none | Does not use a parity bit on the line. |
parity odd | Uses a parity bit on the line for odd parity. |
protocol lpd | Applies Line Printer Daemon (LPD) protocol on the line. |
71 |