
| 5: Commands and Levels |
|
|
default local port | Restores the default syslog local port. |
default remote port | Restores the default syslog remote port. |
exit | Returns to the config level. |
host <IP address> | Sets the address of the syslog recipient. |
level <severity> | Sets the minimum severity of events that will be logged. |
local port <number> | Sets the syslog local port. |
no host | Removes the address of the syslog recipient. |
no level | Disables logging of all events. |
remote port <number> | Sets the syslog remote port. |
show | Displays the syslog settings and statistics. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
state disable | Disables syslog logging. |
state enable | Enables syslog logging. |
write | Stores the current configuration in permanent memory. |
task 1 |
|
activity none | Sets the EventTrak task activity to None. |
activity output <number> | Sets the EventTrak task activity to control the designated |
| output pin. |
activity ping | Sets the EventTrak task activity to send a ping once per |
| second. |
clrscrn | Clears the screen. |
default activity | Sets the default EventTrak task activity, which is None. |
default description | Removes the description of an EventTrak control task. |
default output control | Sets the default EventTrak output control, which is Exclu- |
| sive. |
description <text> | Sets the description of an EventTrak control task. It will |
| appear in |
exit | Exits to the EventTrak level. |
match <number> | Changes to the command level for EventTrak Match con- |
| figuration. |
no ping address | Removes the EventTrak ping address. |
output control exclusive | Sets the EventTrak output control to exclusive, so if the |
| activity is to |
output control | Sets the EventTrak output control to be |
| may be combined |
ping address <text> | Sets the EventTrak ping address to be used when the |
| activity is to send |
rss trace ping responses disable | Turns off RSS tracing of EventTrak ping responses. |
rss trace ping responses enable | Turns on RSS tracing of ping responses received by this |
| EventTrak task. |
rss trace steps disable | Turns off RSS tracing of EventTrak task steps. |
rss trace steps enable | Turns on RSS tracing of each step taken by an EventTrak |
| task. |
rss trace triggers disable | Turns off RSS tracing of EventTrak task triggers. |
rss trace triggers enable | Turns on RSS tracing of triggers emitted by this EventTrak |
| task. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current |
86 |