| 5: Commands and Levels |
|
|
step <letter> | Changes to the command level for EventTrak Task Step |
| configuration. |
task <number> | Changes to the command level for EventTrak Task confi- |
| guration. |
write | Stores the current configuration in permanent memory. |
tcp |
|
ack limit <packets> | Sets the number of packets that must be received before |
| an ACK is forced. |
auto show stats | Continuously shows TCP statistics |
clear counters | Zeros TCP counters |
clrscrn | Clears the screen. |
default ack limit | Restores the default ack limit of 3 packets. |
default send data | Sets TCP to send data in accordance with standards. |
exit | Exits to the configuration level. |
no clear counters | Unzeros TCP counters |
resets disable | Does not send TCP RSTs upon connection to unused |
| ports. |
resets enable | Sends TCP RSTs upon connection to unused ports. |
send data expedited | Sets TCP to send data whenever the window is sufficient- |
| ly open, for improved |
send data standard | Sets TCP to send data in accordance with standards. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
show stats | Shows TCP statistics |
write | Stores the current configuration in permanent memory. |
terminal 1 |
|
break duration <milliseconds> | Sets how long a break should last when it is being sent to |
| the line. |
clrscrn | Clears the screen. |
default break duration | Restores the break duration to the default value (500 ms). |
default terminal type | Sets the default terminal type, "UNKNOWN". |
echo disable | Disables echoing of characters received on the line back |
| to the line. |
echo enable | Enables echoing of characters received on the line back |
| to the line. |
exit | Exits to the configuration level. |
exit connect menu disable | On the login connect menu, removes the menu item allow- |
| ing the user to exit |
exit connect menu enable | On the login connect menu, inserts the menu item allow- |
| ing the user to exit |
line <line> | Enters the line level. |
login connect menu disable | Disables the login connect menu, so a user will get the |
| CLI immediately |
login connect menu enable | Enables the login connect menu, so a user will get the |
| menu rather than the |
lpd <line> | Enters the configure lpd level. |
no send break | Removes the configured send break character. |
preview connect menu | Shows the layout of the connect menu with current set- |
91 |
