Lantronix 2100 - page 87

5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 87
CLI session.
step <letter>
Changes to the command level for EventTrak Task Step
configuration.
task <number>
Changes to the command level for EventTrak Task confi-
guration.
write
Stores the current configuration in permanent memory.
task 1 (config-eventtrak-task:1.1) level commands
activity none
Sets the EventTrak task activity to None.
activity output <number>
Sets the EventTrak task activity to control the designated
output pin.
activity ping
Sets the EventTrak task activity to send a ping once per
second.
clrscrn
Clears the screen.
default activity
Sets the default EventTrak task activity, which is None.
default description
Removes the description of an EventTrak control task.
default output control
Sets the default EventTrak output control, which is Exclu-
sive.
description <text>
Sets the description of an EventTrak control task. It will
appear in
exit
Exits to the EventTrak level.
match <number>
Changes to the command level for EventTrak Match con-
figuration.
no ping address
Removes the EventTrak ping address.
output control exclusive Sets the EventTrak output control to exclusive, so if the
activity is to
output control logical-or
Sets the EventTrak output control to be Logical-Or, so it
may be combined
ping address <text>
Sets the EventTrak ping address to be used when the
activity is to send
rss trace ping responses disable
Turns off RSS tracing of EventTrak ping responses.
rss trace ping responses enable Turns on RSS tracing of ping responses received by this
EventTrak task.
rss trace steps disable
Turns off RSS tracing of EventTrak task steps.
rss trace steps enable
Turns on RSS tracing of each step taken by an EventTrak
task.
rss trace triggers disable
Turns off RSS tracing of EventTrak task triggers.
rss trace triggers enable
Turns on RSS tracing of triggers emitted by this EventTrak
task.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
step <letter> Changes to the command level for EventTrak Task Step
configuration.
task <number>
Changes to the command level for EventTrak Task confi-
guration.
write
Stores the current configuration in permanent memory.
task 2 (config-eventtrak-task:2.2) level commands
activity none
Sets the EventTrak task activity to None.
activity output <number>
Sets the EventTrak task activity to control the designated
output pin.