Lantronix 2100 Lpd 2 config-lpd2 level commands, Match 1 config-eventtrak-match2.1 level commands

	5: Commands and Levels
write	Stores the current configuration in permanent memory.
lpd 2 (config-lpd:2) level commands
banner disable	Disables printing banner for all print jobs. Only print the
	banner when a
banner enable	Enables printing banner for all print jobs.
binary disable	Treats print job as ascii text. Filters out all non-ascii cha-
	racters and
binary enable	Treats print job as binary. Sends data byte-for-byte to the
	printer.
capture disable	Redirects serial output back to the line.
capture enable	Redirects serial output from the line to this CLI session.
clrscrn	Clears the screen.
convert newline disable	Disables converting single new line and carriage return
	characters to
convert newline enable	Enables converting single new line and carriage return
	characters to
eoj disable	Disables sending the end-of-job string after each print job.
eoj enable	Enables sending the end-of-job string after each print job.
eoj text binary <binary>	Sets the end-of-job text allowing for binary characters.
eoj text set <text>	Sets the end-of-job text.
exit	Exits to the configuration level.
formfeed disable	Disables the printer from advancing to the next page at
	the end of each
formfeed enable	Forces the printer to advance to the next page at the end
	of each print job.
kill	Ends the current print job on this lpd line.
line <line>	Enters the line level.
lpd <line>	Enters the configure lpd level.
no eoj text	Removes the end-of-job string.
no queue name	Removes the queue name.
no soj text	Removes the start-of-job string.
queue name <text>	Sets the name of the queue that this lpd line belongs to.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
show statistics	Displays statistics and status information for this lpd line.
soj disable	Disables sending the start-of-job string after each print
	job.
soj enable	Enables sending the start-of-job string after each print job.
soj text binary <binary>	Sets the start-of-job text allowing for binary characters.
soj text set <text>	Sets the start-of-job text.
terminal <line>	Enters the configure-terminal level.
terminal network	Enters the configure-terminal level for the network.
test print <number of lines>	Prints lines of text directly to the lpd line.
tunnel <line>	Enters the tunnel level.
write	Stores the current configuration in permanent memory.
match 1 (config-eventtrak-match:2.1) level commands
case sensitive no	Sets EventTrak monitoring to be insensitive to case, so

IntelliBox-I/O 2100 Command Reference 74