
| 5: Commands and Levels |
|
|
priority very low | Sets |
replyto <email address> | Sets |
send | Sends an email using the current settings. |
server port <number> | Sets the port used by the SMTP server. |
show | Displays email settings. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
show log | Displays the email log. |
show statistics | Displays email statistics. |
subject <string> | Sets the subject for email alerts. |
to <email addresses> | Sets email address to which the email alerts will be sent. |
trigger <xio1/xio2> <high/low> | Specifies input name and voltage level to trigger sending |
| an email. |
write | Stores the current configuration in permanent memory. |
cli |
|
clear ssh counters | Sets the SSH counters to zero. |
clear telnet counters | Sets the Telnet counters to zero. |
clrscrn | Clears the screen. |
default quit connect line | Restores the default string used to quit the "connect line " |
| command. |
enable level password | Sets or removes the |
| and prompting. |
exit | Exits to the configuration level. |
login password | Sets or removes the CLI login password by challenging |
| and prompting. |
no clear ssh counters | Restores the IP SSH counters to the aggregate values. |
no clear telnet counters | Restores the IP Telnet counters to the aggregate values. |
quit connect line <string> | Sets the string used to quit the "connect line " command. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
show ssh | Displays the SSH server settings. |
show telnet | Displays the Telnet settings and statistics. |
ssh disable | Disables the SSH Server. |
ssh enable | Enables the SSH Server. |
ssh max sessions <number> | Sets the maximum allowed concurrent incoming SSH |
| sessions. |
ssh port <number> | Sets the local port that the SSH server uses. |
telnet disable | Disables the Telnet Server. |
telnet enable | Enables the Telnet Server. |
telnet max sessions <number> | Sets the maximum concurrent incoming Telnet sessions. |
telnet port <number> | Sets the local port that the Telnet server uses. |
write | Stores the current configuration in permanent memory. |
configure (config) level commands |
|
arp | Changes to the command level for ARP configuration and |
| status. |
clear host <host> | Removes an entry from the DNS Cache |
cli | Change to menu level for CLI configuration and status |
clrscrn | Clears the screen. |
56 |