To install in Ethernet | Vivotek PT71373GPP/ISMA guide

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

will become lighted. Operating in either network mode, the green LED will flash every second as heartbeat to indicate alive. If the red LED is blinking, please check the network connections.

To install in Ethernet

Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet cable plug in the power adapter. If the LED turns out to be steady blue, go to next paragraph “Software installation”. If the Ethernet is not available, Network Camera will switch to wireless LAN mode.

To install in wireless LAN

If the Ethernet is not available while power on, the Network Camera will search for any access point with the SSID “default”. Once any access point is found, the LED will turn blue to wait for installation. If the network environment cannot meet the default settings, install Network Camera in Ethernet to proceed with wireless LAN configuration.

- 8 -

www.vivotek.com

User's Manual -

Image 9

Vivotek PT71373GPP/ISMA manual To install in Ethernet

Contents

Wireless Pan/Tilt Network Camera PT7137 Before You Use This Product Table of Contents FTP 886-2-82455282 886-2-82455532 Package Contents Hardware installation Installation To install in Ethernet Software Installation Page Page Page Initial Access to the Network Camera Check Network SettingsAdd Password to Prevent Unauthorized Access Authentication How to Use Installing plug-in Main Screen with Camera View Primary user’s capability Client Settings Configuration Stop Tilt speed Pan speedPan Patrol Client settings Page Url http//Network Camera/client.html Fine-tuning for Best Performance Administrator’s capability For Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Opening accounts for new users Protect Network Camera by passwords Build a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network type Network settingsLAN & PPPoE Get IP address automatically & Use fixed IP address Rtsp Streaming HttpPage Url http//Network Camera/setup/network.html Wlan Configuration Tkip AES Url http//Network Camera/setup/wireless.html Ddns Access List Audio and Video Video SettingsGeneral Video orientation Audio settings Image Settings Camera control area Camera Control Preset function area FTP Email & FTP This value from 1025 to Motion detection Snapshot Application settings Snapshot file name prefix Weekly scheduleSend out the snapshot while motion detection Sequential operationPage Video Clip Page System log Viewing system parameters Calibrate Maintenance Troubleshooting Reset and restoreStatus LED URL commands of the Network Camera Get server parameter valuesMethod GET/POST Return Set server parameter values Where parameter pair is parameter=value\r\n Skip to invoke default server WirelessNetwork CameraAvailable parameters on the server Yyyy/mm/dd Blank Group Security 255.255.255.0 192.168.0.99 Than 40 characters Default Group Wireless restart554 5558 00000000 0000000000Group IPFilter 0.0 176x144 for mobile 256640x480 For Computer For 60Hz only 512000 AAC4 for computer Gamr for mobile12200 Tilt speed To take effect Script.vssx Camera ControlIP address 514 Syntax Recall Application page CGI command Page Maxsize Prefixappindex Account management Capture single snapshot Privilege=conf System logs Configuration file Post data Upgrade firmware Networking Technical specifications Technology License Notice Liability Electromagnetic Compatibility EMC