REFRIGERANT PIPING INSTALLATION SECTION

FIELD CHARGING

NOTE: If operating superheat is more than 5°F above the chart value, add refrigerant. If below the chart value remove refrigerant. If below the limit line, remove refrigerant.

Example (Using the 12,000 Btuh cooling chart):

1.Suction pressure is 65 psi. which equals 38° F on The R-22 Scale of the Low-

Side Gauge.

2.Suction line temperature taken at the unit is 70° F. 70° F minus 38° F equals 32° F superheat.

3.Outdoor temperature is 90° F; indoor temperature is 80° F.

4.Intersection of the indoor-temperature and outdoor-temperature lines occur on the 12° F superheat line.

5.Add charge to obtain 12° F superheat.

Instructions:

1.Measure suction pressure and determine evaporator-refrigerant temperature on R-22 scale of low-side gauge.

2.Measure suction-line temperature on suction line of the unit.

3.Measure outdoor and indoor tempera- tures.

4.Determine from the table what the super- heat should be for the indoor and outdoor temperatures. (Example indicates 12° F superheat.)

5.Adjust charge if needed. Be sure unit is running at stabilized condition.

NOTE: For installation of the indoor unit and start-up of the system, please refer to the appropriate installation manual for your indoor product to complete the installation.

STARTING THE UNIT

Before starting the unit in cool weather, power the system 24 hours before at- tempting to start.

Do a final system check using the super- heat/subcooling method. Record results on Test Unit Performance Data sheet (next page).

-Cooling mode superheat is set with a proper sized piston and charge, using the field charging charts.

-Heating mode superheat is set with a TXV andshouldbe5°F. Whenchargingasystem in heat mode, use the subcool method field charging charts.

Remove gauge set. Mount all access panels and make sure they are properly secured.

Make final visual inspection and repair any deficiencies.

(Proceed to the Sequence Of Operation

on the following pages)

Multi-zone Heat Pump Condensing Units

14

www.enviromaster.com

Page 14
Image 14
EMI EMI Corp manual Refrigerant Piping Installation Section Field Charging, Starting the Unit

EMI Corp specifications

EMI EMI Corp is a prominent organization in the technology sector, particularly known for its advanced electronic manufacturing solutions. Established with a vision to provide innovative design and engineering services, EMI has set itself apart through its commitment to quality and customer satisfaction. The company offers a diverse range of products and services, catering to various industries, including aerospace, automotive, telecommunications, and consumer electronics.

One of the key features of EMI is its state-of-the-art manufacturing facilities equipped with the latest technologies. The company employs advanced automation and robotics in its production processes, allowing for higher efficiency and precision. This not only reduces the potential for human error but also accelerates the manufacturing timeline, ensuring timely delivery of products.

EMI also places a strong emphasis on research and development. With a dedicated team of engineers and technologists, the company invests heavily in exploring new materials, refining manufacturing techniques, and developing proprietary technologies. This commitment to innovation has led to the creation of several industry-leading products, including high-performance printed circuit boards (PCBs) and custom electronic assemblies.

Another characteristic that differentiates EMI is its focus on sustainability. The company has implemented eco-friendly practices throughout its operations, striving to minimize waste and reduce its carbon footprint. By using sustainable materials and energy-efficient processes, EMI is dedicated to contributing positively to the environment while maintaining robust growth and profitability.

Furthermore, EMI EMI Corp prides itself on its strong customer relationships. The company understands that collaboration is essential for success and works closely with clients to tailor solutions that meet their specific needs. This customer-centric approach ensures that every product delivered aligns with the client’s requirements, enhancing satisfaction and fostering long-term partnerships.

In conclusion, EMI EMI Corp stands out in the technology landscape due to its advanced manufacturing capabilities, commitment to innovation, focus on sustainability, and dedication to customer service. As technology continues to evolve, EMI remains poised to adapt and lead in the competitive electronic manufacturing sector, making significant contributions to various industries worldwide.