ELECTRICAL WIRING INSTALLATION SECTION
Inside electrical access panel.
Note: Refer to the units’ wiring diagram for all wiring.
Wire Diagram
8.Check wiring diagram for the re- quired number of low voltage wires to be run between indoor and out-
Low Volt High Volt
Plastic Edge Guards
door sections.
Low Volt Connection
9.Connect the 24 Volt wiring matching color to color. Refer to the wiring diagram on the inside panel of the condenser, and also refer to the wiring diagram on the indoor unit. Low Volt interconnect should be at least 18 awg.
10.To replace side panel slide the slotted holes of the panel onto the loosened screws of the front
panel so that the edge of the fr panel covers the edge of the side panel.
Completed |
Electrical Connections |
11. asten all remaining loose screws.
www.enviromaster.com |