▶“Shared” – allows communication only with other devices with identical WEP settings.
“Key length” The administrator can select the key length among 64 or 128 bits. 64bits is the default setting.
“Key format” Hexadecimal or ASCII. “HEX” is the default setting.
▶“HEX” digits consist of the numbers 0~9 and the letters
▶“ASCII” is a code for representing English letters as numbers from
“Network Key” Entering a key in either hexadecimal or ASCII format. When selecting different key length, acceptable input length is listed as following:
64 bits key length: 10 Hex digits or 5 characters.
128 bites key length: 26 Hex digits or 13 characters.
Note: When 22(“), 3C(<) or 3E(>) are input in network key, the key format can’t be changed to ASCII format.
“Algorithm” Choosing one of the following algorithm for
▶“TKIP”
▶“AES”
Some invalid settings may cause the system failing to respond. Change the configuration only if necessary and consult with your network supervisor or experienced users for correct settings. Once the system has lost contact, refer to Appendix A for reset and restore procedures.
- 36 -
www.vivotek.com
