mapping. Refer to the instructions for the external FTP server for details. The folder privilege must be open for upload.
“1st FTP remote folder for motion detection” Granted folder on the external FTP server. This folder is for images captured due to motion detection events. The string must conform to that of the external FTP server. Some FTP servers cannot accept preceding slash symbol before the path without virtual path mapping. Refer to the instructions for the external FTP server for details. The folder privilege must be open for upload.耟
“1st FTP passive mode” The Network Camera is located inside the network protected by a firewall, data connection for FTP may be prohibited. By selecting passive mode, the FTP can bypass the rule and allow snapshot upload to proceed. If the passive mode is selected, the Network Camera can automatically attempt for active mode, if the external FTP server does not support passive mode.
“2nd FTP server” The domain name or IP address of the backup FTP server. “2nd FTP server port” The port to access the backup FTP server.
“2nd FTP user name” Granted user name on the backup FTP server. “2nd FTP password” Granted password on the backup FTP server.
“2nd FTP remote folder” Granted folder on the backup FTP server. This folder is for system log information and for images captured due to sequential operation or digital input events.
“2nd FTP remote folder for motion detection” Granted folder on the external FTP server. This folder is for images captured due to motion detection events. “2nd FTP passive mode” Passive mode setting for the backup FTP server.
- 41 -
www.vivotek.com
