VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Camera control
This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation by a control panel.
Preset Position
In this page, you can set preset positions for the Network Camera. You can also select some preset positions for it to partol. A total of twenty preset positions can be configured.
Follow the steps below to set a preset position:
1.Adjust the Network Camera to a desired position using the buttons on the right side of the window. Click Set as home or Default home to define your home definition.
2.In the Preset position name text box, enter a descriptive name for the preset position. The preset position name allows up to forty characters. Click Add to take effect.
3.To remove a preset position from the list, select a preset position name from the Preset Positions drop- down list and then click Delete.
4.Click Save to take effect.
For example:
Dwelling time (sec)
Set the stop time of each preset location during auto patrol of the network camera.
User's Manual - 51
