VIVOTEK
User's Manual - 69
Camera Control
This section explains how to control the Network Camera’s Pan/Tilt/Zoom/Focus operation via
the control panel and how to preset positions.
Preset Locations
On this page, you can preset positions for the Network Camerato go to directly or patrol. A total of 128
preset positions can be congured.
Please follow the steps below to preset a position:
1. Adjust the shooting area to a desired position using the buttons on the right side of the window.
2. Click Set Current position as home or Restore home position to default to define your home
position.
3. Enter a name for the preset position, which allows for up to forty characters. Click Add to enable the
settings. The preset positions will be displayed under the Preset Location list on the left-hand side.
4. To add additional preset positions, please repeat step 1~3.
5. To remove a preset position, select its checkbox from the drop-down list and click Remove.
6. Click Save to enable the settings.
functions are the same
as the control panel on
home page
1
2
6
5
3