VIVOTEK
User's Manual - 7
Installation

Hardware Installation

Follow the steps below to install the Network Camera to the ceiling:
1. Attach ceiling mount bracket A to the Network Camera and secure it with two small screws.
2. Drill three pilot holes into the ceiling; hammer the plastic anchors into the holes.
3. Fasten ceiling mount bracket B to the ceiling with three screws.
4. Slide the Network Camera into ceiling mount bracket B.
5. Secure the ceiling mount bracket A and B with a small screw.
2
3
4
1
A B
5
► If you want to intall the Network Camera on
the wall, please use the wall mount bracket
(optional, not included in the package).
► Keep away from interference source to
make sure performance integrate, and
avoid snow or moiré patterning.
Activity
Power/MIC
NOTE: