Vizio GV46L FHDTV20A Basic LCD Hdtv Start Up, Connecting the Power Cable, Initial Setup

VIZIO GV46L FHDTV20A User Manual

Chapter 3 Setting Up to Watch Television

For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 6.

3.1 Basic LCD HDTV Start Up

1.Connecting the Power Cable

Connect the power cord to the power cord connector on the back of the LCD HDTV, and then plug the power cord into an AC wall socket.

2.Connect Audio and Video Cables to the LCD HDTV (see pages 18 ~ 31 for detailed steps)

3.Turning Power On

Once all the components are connected, press the Power ON button on the side of the LCD HDTV, or press the Power ON (Red) button on the remote control.

4.Initial Setup

After powering on the TV set, the Initial Setup screen will come up; please press the OK key on the remote control.

a.The Language choice screen will be displayed; the default English option is highlighted. If you wish to change the OSD language to Français or

Español, press the button on the remote control to select the language you want.

Press the button on the remote to go to the next screen.

Note: At this point, if a Set-Top Box from your Local Cable or Satellite Service Company or other equipment is been used; please press the EXIT key on the remote control and go to Step 5. If this is not your case, please continue at Step b.

Version 12/28/2007	33
	www.VIZIO.com