2.5 - Connecting Coaxial (RF)
There are several options for connecting your antenna or cable to your new P42 Plasma TV - directly to the TV or through your VCR. Based on your home theater configuration, you can decide which option is the right one for you.
2.5.1 - Using Your Antenna or Cable TV
Installation:
1.Turn off the power to the Plasma TV.
2.Connect the coaxial (RF) connector from your antenna or cable box to the RF connector on the rear of your Plasma TV.
3.Turn on the power to the Plasma TV
4.Select TV1 using the INPUT button on the front of the Plasma TV.
See page 30 for selecting the TV source within the OSD menus (antenna, cable, HRC and IRC).
Note: Make sure the antenna or cable TV is correctly grounded.
2.5.2- Using the Antenna through Your VCR Installation:
1.Turn off the power to the Plasma TV and VCR.
2.Connect the “Output to TV” (RF Out or Antenna Out) connector on the rear of your VCR to the RF connector on the rear of your Plasma TV.
3.Turn on the power to the Plasma TV and VCR.
4.Select TV1 using the INPUT button on the front of the Plasma TV.
5.Select Channel 3 or 4 to match the channel selected on the rear of your VCR.
Note:
a)If you have an
b)Make sure the antenna or cable TV is correctly grounded.
Version - 2/21/200521
www.vizioce.com
