Vizio P42 manual Getting Started 3.1 - Turning your Plasma TV On and Off, To remove the stand base

Chapter 3 - Getting Started

3.1- Turning your Plasma TV On and Off

1.Plug the power cord into an AC wall socket.

2.Press the AC switch button on the back of the Plasma TV. The POWER indicator on the front panel will light orange.

3.Press the POWER button on the front panel or the POWER button on the remote control to power on the Plasma TV. The POWER indicator on the front panel will light green.

4.Select input source for the Plasma TV, via either OSD menu or remote control.

5.If connecting to antenna, cable or other RF source on TV inputs, see page 30 to configure the product to receive all available channels.

3.2- Preparing the Plasma for Wall Mounting

The VIZIO P42 can either be kept on the base stand or mounted to the wall for viewing. If you choose to mount the P42 to the wall, you will need to attach 4 stand-off screws (included within the product packaging) to back panel so that the TV will fit evenly against a wall mount. Please follow the instructions below for removing the base stand and adding the stand-off screws to prepare the TV to be mounted.

To remove the stand base:

1.Unplug all the cables and cords from the Plasma TV.

2.Place the Plasma TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the display.

3.Remove the 6 screws on the stand base of the Plasma TV and the 2 screws on the upper part of the display.

4.The stand can now be removed from the back panel.

To add the stand-off screws to the back panel:

1.Secure both 55 mm stand-off screws in the screw holes on the top side of the back panel.

2.Secure both 42 mm stand-off screws in the screw holes on the bottom side of the back panel.

The Plasma TV will now fit flush against a Plasma TV wall mount. Please make sure to read the directions of your specific wall mount to properly hang the P42.

Version - 2/21/2005	25
	www.vizioce.com